Trailer Wheels that Can Fit Tire Size 235/80R16

Question

Question:

Looking to replace my boat trailer wheels but want to re-use the tires I currently have. Tires are 235/80R16 Current wheels are 6 lug Do y’all have any options?

asked by: George F

0

Expert Reply:

I attached a link to a page that has all of the wheels we offer that would work for you. They are all 16 inch diameter wheels that have a 6 lug bolt pattern. A really popular option is the Dexstar Mini Mod part # AM20746 which is a silver powdercoated mini mod wheel.

expert reply by: Jameson C

0

Answer 1

We do! I recommend going with the Aluminum Viking Series Valhalla Trailer Wheel #TA75FR which is compatible with up to 100 psi but you'll need to swap out the rubber valve stem (only rated for up to 80 psi) to the Americana Metal, Bolt-In Valve…

view full answer...

Answer 2

Yes, a 16 inch trailer wheel and tire can easily fit in place of a 15 inch 6 lug wheel and tire like with the part #AM34834. This is the size ST235/80R16 which has a weight capacity of 3,500-lb maximum load at 90 psi and has an overall diameter of…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 5

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 6

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 7

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 8

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6 inch whereas the 225/75-15 fits widths that are 5 inch to 6-1/2 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 9

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 10

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 11

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 12

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Trailer Wheels that Can Fit Tire Size 235/80R16

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching