Comparing Tekonsha Universal 7-Way Versus ETBC7L Install on a 2023 Kia Telluride

Question

Question:

For a 2023 Kia Telluride, please compare the benefits/disadvantages of using 7-way part #22551 with using a combination of the 4-way C59236 harness and the 7-way ETBC7L upgrade. I have no need for a 4-way. Ive seen both options recommended on etrailer. Thanks.

asked by: John T

0

Expert Reply:

Using the Universal Wiring Harness w/ ModuLite and Brake Controller Harness # 22551 on your 2023 Kia Telluride will allow you to use a dash mounted brake controller like the Tekonsha Prodigy P3 # 90195. It also only has a 7-way connection which would require you to use an Adapter # 78118 for a smaller trailer with only a 4-way connectorl

The combination of the Curt Powered Tail Light Converter # C59236 and 7-Way RV Upgrade Kit # ETBC7L would require you to use a wireless/Bluetooth brake controller like the Curt Echo # C51180. This kit also gives you a 7-way blade and 4-flat connector which are the most common connectors used on trailers.

expert reply by: Bud M

0

Answer 1

The plug-in trailer wiring harnesses for a 2023 Kia Telluride that use the factory tow package port were all recalled due to a fire hazard potential, dealer and aftermarket. That said, we do still have an option for you but you must hardware into the…

view full answer...

Answer 2

Yes, the adapters we have do work well and I have a couple options for you based on the type of brake controller you will want on your 2023 Toyota RAV4 Prime. First is the easiest to install. The 7-Way RV Upgrade Kit #ETBC7L will accept the 4-way…

view full answer...

Answer 3

We have what is needed to add a 7-Way connector. If you already have the flat 4 plug in place, the easiest solution to get to a 7-Way adapter is the 7-Way RV Upgrade Kit for Trailer Brake Controller Installation, #ETBC7L. The pre-wired 7- and 4-way…

view full answer...

Answer 4

I would be happy to help you and make a recommendation based on fitment. First of all you won't have to drill into anything to mount your 7-way vehicle connector. All you will need is the Curt Easy Mount Bracket item #C58000. This bolts directly…

view full answer...

Answer 5

Since your 2022 Toyota Sienna has a factory 4-way the easiest brake controller and 7-way install solution would be to use the #ETBC7L to convert it to a 7-way and then for a brake controller the Curt Echo Mobile part #C51180 and you'd be set.

view full answer...

Answer 6

If you have a vehicle specific wiring harness for a brake controller then that would indicate that you have a factory tow package and subsequently would already have a 7-way at the back of your vehicle. The universal 7-way connector #ETBC7 is meant…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Comparing Tekonsha Universal 7-Way Versus ETBC7L Install on a 2023 Kia Telluride

Products Featured in This Question

Continue Researching