Is There A 5 on 4-1/2 Aluminum HWT Hi-Spec Series 03 Mod Trailer Wheel

Question

Question:

Aluminum HWT Hi-Spec Series 03 Mod Trailer Wheel - 15 x 6 Rim - 6 on 5-1/2 I would love this in 5 on 4-1/2. Any chance?

asked by: Bruce J

0

Expert Reply:

The 5 on 4-1/2 version of the Aluminum HWT Hi-Spec Series 03 Mod Trailer Wheel - 15" x 6" Rim - 6 on 5-1/2 # AM22646 is part # AM22627.

expert reply by: Kevin C

0

Answer 1

Yes, the HWT Aluminum HWT Hi-Spec Series 03 Mod Trailer Wheel #AM22646 referenced in your question will work perfectly with your current ST225/75R15 size tires. This 15 inch wheel with a 6 inch width is a match for ST225/75R15 trailer tires. The…

view full answer...

Answer 2

Yes, they will so long as the GM factory TPMS valve stems you're using have a 0.453" valve stem. The Sendel Aluminum Mod Trailer Wheel item #AM22646 you were looking at requires a 0.453" valve stem. Additionally, you'll want to…

view full answer...

Answer 3

I have attached a chart that gives the torque specs for trailer lugs based on stud size, wheel size, and wheel material. For your Aluminum HWT Mod 15 Inch Trailer Wheel, #AM22646, and 1/2 inch stud size, the proper torque is 90 to 100 ft lbs. Please…

view full answer...

Answer 4

For your 5th wheel camper, the wheels will have holes that will fit the 1/2 inch and leave space for easy installation. The lug nut are coned to help center the wheel on the hub so there won't be any slop or issue. Wheels like the Aluminum HWT…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 8

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 9

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6 inch whereas the 225/75-15 fits widths that are 5 inch to 6-1/2 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 10

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 11

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 12

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Is There A 5 on 4-1/2 Aluminum HWT Hi-Spec Series 03 Mod Trailer Wheel

Featured Help Information

Miscellaneous Media

Continue Researching