Dimensions of Sleeve-Lock Trailer Coupler CTA-196

Question

Question:

I need the measurements for the inside and outside of where this hitch bolts on. Item # CTA-196. They may be there, but I could not find them. Thanks!

asked by: David L

1

Helpful Expert Reply:

On the mounting bracket side of the # CTA-196 the outer width is 2-7/8 inches and the inner width is 2-3/8 inches. If you check out the attached review video for this you can see these dimensions as well as a few others.

expert reply by: Jameson C

1

Answer 1

Hi Gary; you're referring to the Hydrapro Alpha G-1600 #DH94FR. Most states require a separate battery by law so it is best to install a breakaway kit like the #3802308. This ensures the breakaway will work all the time since the coach batteries…

view full answer...

Answer 2

Hey Kevin, the DeeMaxx Alpha G1600 Electric Over Hydraulic Actuator for Disc Brakes - Plug and Play Kit #DE75KR that you referenced is a solid option and does not require an additional control box to operate unless you would be referring to a brake…

view full answer...

Answer 3

I wish we had an install video or even a manual for the Kodiak Caliper Rebuild kit #KDBC225KIT that you referenced but the best we can offer at this time is an exploded diagram that shows how all of the parts go together.

view full answer...

Answer 4

While there is not a manual or video available for the Kodiak Disc Brake Caliper Rebuild Kit #KDBC225KIT I did find an expanded drawing of the parts of Kodiak Disc Brake Caliper #KDBC225S which should help so you can see how the pieces fit. The…

view full answer...

Answer 5

There is not any melting that is done to keep the dust seals on, but they may have used an adhesive of some sort. Normally they are just a tight fit and a small flat head screwdriver can be used with a rubber mallet to remove it. Most of the time you…

view full answer...

Answer 6

Actually, the P3 now has the upgraded axis accelerometer like the P2. The Tekonsha P3 Trailer Brake Controller #90195, will work with both electric over hydraulic brakes on the trailer as well as electric brakes. It has a menu option on the display…

view full answer...

Answer 7

I would be happy to help. The correct replacement return spring for the jack feet on your 10,000lb side wind jack will be dependent on which brand it is. For example if you have an etrailer or Ram branded jack such as the #TJD-12000SP-F2 then you…

view full answer...

Answer 8

A example of a conventional steel trailer wheel is Dexstar #AM20766. Modular wheels are simply trailer wheels that feature cosmetically-appealing holes rather than spokes or a solid inner surface. A good example of a modular trailer wheel would be…

view full answer...

Answer 9

The Hadco 322 is obsolete and no longer around. I don't have any information on the bearings it uses either, so you will need to identify the bearings to see if there is a possible replacement. You can look to see if the part number is stamped in…

view full answer...

Answer 10

Hey Greg, I would recommend you go with the part #K23-472-473-00 which is the exact correct size and capacity your trailer needs. If you go with a wider assembly (if it would fit) you don't really gain better braking performance and instead you…

view full answer...

Answer 11

We may have a grease seal that will work in your application however, my research had conflicting measurements for the Hadco 3122 that you referenced. I contacted my technical contact at Redline to verify that the Redline Grease Seal #1105-100-031…

view full answer...

Answer 12

We may have a grease seal that will work in your application however, my research had conflicting measurements for the Hadco 3122 that you referenced. I contacted my technical contact at Redline to verify that the Redline Grease Seal #1105-100-031…

view full answer...

Dimensions of Sleeve-Lock Trailer Coupler CTA-196

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching