Recommended Timbren Suspension, Hubs, and Electric Brakes for an Overland Trailer
Updated 03/05/2023 | Published 03/03/2023 >
Products Featured in This Question
Question:
Need know what I need for over land trailer , I think i need timbren 4 lift . Not sure what electric brakes I need . Can you help me
asked by: Timonthy B
Expert Reply:
Since you are setting up an overland trailer, I recommend going with one of Timbren's Heavy Duty Systems like the Timbren Axle-Less Trailer Suspension item # TASR1THDS04. This system has a 4" lift, a 4 bolt brake flange, and has a 2,200 lbs capacity.
With this system you can add the Dexter Trailer Hub & Drum Assembly item # 84546UC3-EZ. This hub has a 5 on 4-1/2" bolt pattern. This hub will work great with the Dexter Electric Trailer Brake Kit item # 23-26-27.
If you have a different lug pattern in mind and a specific tire and wheel size feel free to email me back with that information and I will make sure you get the right parts.
I linked a couple of review videos below so you could take a look at these parts.

Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle - 4" Lift - 5 Bolt - 3.5K
- Trailer Axles
- Rubber Spring Suspension
- Standard Grade
- No Hubs
- 3500 lbs
- Spindles Only
- Universal Fit
- Lift - 4 Inch
- Timbren
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Shop: Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle w/ 2" Lift - 5 Bolt - 3.5K
- Shop: Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle - 4" Lift - 5 Bolt - 3.5K
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Shop: Dexter Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: etrailer Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 5,200 lbs to 7,000 lbs
- Search Results: timbren 3500
- Video: Let’s Check Out the Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles
- Search Results: dexter hub 8 247
- Q&A: Brake And Hub/Drum Assemblies For The Timbren Axle-less Trailer Suspension # TASR35HDS06
- Q&A: Can Trailer Brakes be Used if they are Rated Higher than the Axle
- Q&A: How to Determine Correct Replacement Trailer Hub and Spindle
- Q&A: Which Hubs Fit the Timbren Heavy-Duty Axle-Less Trailer Suspension # TASR35HDS06 with 2" Lift
- Q&A: Should I Use 10 or 12 Inch Brakes on a Trailer with 3,500 Pound Axles and 16 Inch Rims
- Q&A: Recommended Timbren Axle Less System and Hub with 5 on 5-1/2 Bolt Pattern
- Video: Setting up the etrailer Electric Trailer Brakes on a 2017 Grand Design Reflection Fifth Wheel
- Search Results: idler hubs
- Search Results: timbren 3500hd
- Search Results: akebrk~7~sa
- Search Results: 23~468
- Search Results: 23~469
- Video: Complete Breakdown of the Timbren Axle-Less Trailer Suspension w/ Idler Hubs
- Video: etrailer Easy Grease Trailer Hub and Drums Installation - 2020 K-Z Sportsmen Classic Travel Trailer
- Q&A: Hub/Drums for Timbren Axle Less Kit ASR35HDS02 to Add 6 on 5-1/2 inch Bolt Pattern
- Article: Trailer Wiring Diagrams
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Video: Detailed Breakdown of the Ark Drop Down Corner RV Stabilizer Jacks
- Article: How To Measure And Replace Everything In Your Hub Assembly
- Video: Feature Breakdown: #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle