Are Curt Adapter Rails For Ram Puck System Compatible With Reese 5th Wheel Hitch

Question

Question:

Will this work with a reese 5th wheel hitch

asked by: Larry G

0

Expert Reply:

Yes, a Reese 5th wheel hitch will work and is compatible with the Adapter Rails for Curt 5th Wheel Hitch - Dodge Ram Towing Prep Package # C29BR.

The # C29BR just gives you what are essentially industry-standard base rails in the form of an adapter, which is why it will work with Reese hitches.

expert reply by: Kyle S

0

Answer 1

For a trailer that weighs, 14,500 lbs I would strongly recommend a 3500 series truck. Even if the 2500 could technically tow it the 3500's higher rated suspension will make for a much better towing experience. Less sag and a smoother ride when…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

Hey Tom, congrats on the new truck! Typically when we hear that someone has the OEM tow prep package they mean the puck system. This is going to be five circular holes built into the bed of your Ram truck and is by far the best way to attach a 5th…

view full answer...

Answer 6

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 7

Hey Steve, congrats on the new truck. Since your 2026 Ram 3500 has the factory puck system, you'll want the PullRite SuperGlide 5th Wheel Hitch item #PUL28RR. The PullRite SuperGlide 5th Wheel Hitch item #PUL28RR has a 24,000 lbs capacity and…

view full answer...

Answer 8

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 9

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 10

Hey Doug, welcome back! Yes, we have the Andersen Ultimate Safety Chain Kit with Clevis Hooks #RM3230. This is the complete kit, Andersen doesn't have the attachments available individually. It is specifically designed for the gooseneck mount…

view full answer...

Answer 11

Hi Glen, It will depend on what the GVWR (gross vehicle weight rating) is of your trailer to determine which B&W 5th wheel to gooseneck adapter will work best for you. Fifth wheels and gooseneck trailers go off of pin weight instead of tongue…

view full answer...

Answer 12

Hey Ken, welcome back! So this is a really great question but at the end of the day the Curt A25 part #C16046 and the B and W Companion part #BWRVK3600 that both fit the OEM pucks of your 2026 Ram 3500 are really nice hitches that you can't go…

view full answer...

Are Curt Adapter Rails For Ram Puck System Compatible With Reese 5th Wheel Hitch

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching