Trailer Compatibility of Trailer Valet RVR3 Remote-Controlled Trailer Dolly

Question

Question:

Regarding the motorized trailer valet do they make an adaptor to use with 5th wheel trailers?

asked by: Russ H

0

Expert Reply:

The Trailer Valet RVR3 Remote-Controlled Trailer Dolly part # TVRVR3-BB225 has a 3,500 lb weight capacity which is great for most single axle and some tandem axle travel and utility trailers. The valet is not compatible with any trailers larger such as a gooseneck or fifth wheel.

expert reply by: Conner L

0

Answer 1

Yes, the Trailer Valet Combo Ball Tower Mount for RVR Trailer Dolly - 2-5/16" Hitch Ball, part #RVRBB225, can be used with a 1-7/8" ball mount. However, per the rep at Trailer Valet, the 1-7/8" ball mount is not compatible with the…

view full answer...

Answer 2

Hey Paul, in order to obtain a 2" hitch ball setup for the Trailer Valet RVR3 Remote-Controlled Trailer Dolly part #TVRVR3-BB225 which comes with a 2-5/16" hitch ball you simply need the Replacement 2" Hitch Ball for Trailer Valet part…

view full answer...

Answer 3

The maximum grade for the Trailer Valet Remote-Controlled Trailer Dollies is 5 degrees. The capacity does not change this figure although the higher rated RVR9 part #TVRVR9 will preform better than the RVR3 part #TVRVR3-BB225 with a lighter trailer…

view full answer...

Answer 4

I wish I could teleport to you and demonstrate how the Trailer Valet RVR3 #TVRVR3-BB225 would work for you but the best I can do is tell you that I've seen it work in person and show you our demo video that shows it working on a similar trailer.…

view full answer...

Answer 5

The Trailer Valet RVR3 Remote-Controlled Trailer Dolly - Wireless Remote - 3,500 lbs #TVRVR3 you referenced has a tongue weight capacity of 350 lbs max. The mounting bracket with attach directly to your trailer tongue and has a quick release cotter…

view full answer...

Answer 6

I spoke with Trailer Valet about the water resistance of the RVR3 Remote-Controlled Trailer Dolly w/ Hitch Ball Mount #TVRVR3-BB225 and they said it can get wet, but is definitely not waterproof. They mentioned that it can rust over time from this so…

view full answer...

Answer 7

When the ball tower is installed, the total height of the #TVRVR3-BB225 will be 18 inches. This will be pretty much exactly the same as when the frame bracket attachment as well.

view full answer...

Answer 8

The Trailer Valet RVR3 Remote-Controlled Trailer Dolly w/ Hitch Ball Mount - Wireless Remote - 3,500 lbs #TVRVR3-BB225 will work with just about any trailer. It comes with a 2-5/16" ball, but can also attach most trailer frames as well.

view full answer...

Answer 9

Yes, the Trailer Valet RVR3 Remote-Controlled Trailer Dolly w/ Hitch Ball Mount - Wireless Remote - 3,500 lbs, part #TVRVR3-BB225, comes with the 2-5/16" hitch ball and mount. We do sell each of these items, the RVR3 Trailer Dolly and the…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 12

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Trailer Compatibility of Trailer Valet RVR3 Remote-Controlled Trailer Dolly

Product Page this Question was Asked From

Continue Researching