Can You Put 10" Wheels On a 3,500 Lb Axle with Brakes
Updated 02/22/2023 | Published 02/21/2023
Products Featured in This Question
Question:
Will this kit work on a dexter 3,500# axle? I put 10inch wheels on to lower the trailer to fit it in the garage so the 10inch brake kits will not work in my application.
asked by: Brad
Expert Reply:
I do have an option for you but you can't run electric brakes on a 3,500 lb axle with 10" wheels as 10" brakes are too large and 7" brakes have different brake mounting flanges. That said, you can switch to surge brakes like the Kodiak Disc Brake Kit part # K2HR35D-8 which are a confirmed fit for a 3,500 lb axle and will fit 10" wheels. In order to complete your setup you'll need a few other items which I have attached below.
Hydrastar Electric Over Hydraulic Actuator for Disc Brakes part # HBA16
Kodiak Hydraulic Brake Line Kit part # 18SI-BLKIT
Product Page this Question was Asked From
Kodiak Disc Brake Kit - 8" Rotor/Hub - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- LH
- RH
- 3500 lbs
- Brake Assembly
- 5 on 4-1/2
- Hub and Rotor Assembly
- Kodiak
more information >
Featured Help Information
Instructions
Continue Researching
- Search Results: emergency trailer brake
- Q&A: Will The etrailer Hub AKIHUB-545-35-G-EZ-K Fit A 10 Inch Wheel?
- Video: Comprehensive Review: Single-Axle Trailer Hangers for Double-Eye Springs
- Shop: 3-Leaf Double-Eye Spring for 4,000-lb Trailer Axles - 25-1/4" Long
- Shop: Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 7/8" Rear
- Shop: CE Smith U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts - Zinc
- Shop: Single-Axle Trailer Hangers for Double-Eye Springs - 3-1/4" Front, 7/8" Rear
- Shop: 6-Leaf Double-Eye Spring for 7,000-lb Trailer Axles - 24-7/8" Long
- Shop: Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 1-1/4" Rear
- Shop: Terran Industries Single-Axle Hanger Kit for Double Eye Springs - 3-1/4" Tall Front
- Shop: Vehicle Tow Bar Wiring
- Shop: Trailer Hitch
- Q&A: Bearings and Seal Used for AL-KO 7290 Trailer Hubs for #99 Spindles
- Search Results: 576
- Search Results: 521458~5
- Search Results: 152789
- Q&A: Is There a Brake System For a 3,500LB Axle Which Will Allow For 10 Wheels?
- Shop: Fifth Wheel Hitch
- Shop: Base Plate for Tow Bar
- Search Results: 8~285~11
- Search Results: 8~285~10
- Shop: Gooseneck Hitch
- Q&A: Is The Mopar Recreational Flat Tow Wiring Kit Part 68321424AB Required To Flat-Tow a Jeep Cherokee
- Q&A: Do I Need the Mopar 68321424AB Wiring Harness to Flat Tow My 2021 Jeep Cherokee
- Search Results: ra~28
- Shop: Front Mount Hitch
- Q&A: Electric Brakes for a 3500-LB Axle with 10" Wheels
- Q&A: Upgrading Axles from 2,200 lbs to 3,500 lbs to Utilize 10 Inch Electric Brake Assemblies