Will The etrailer Hub AKIHUB-545-35-G-EZ-K Fit A 10 Inch Wheel?
Updated 10/20/2025 | Published 10/12/2025 >
Products Featured in This Question
Question:
Will Hub AKIHUB-545-35-G-EZ-K fit Tire AM3H480? If not, why so I understand
asked by: Ryan H
Expert Reply:
Hi Ryan!
The reason the Kenda 205/65-10 Bias Trailer Tire with 10" White Wheel - 5 on 4-1/2 - Load Range E # AM3H480 will not fit the etrailer Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized # AKIHUB-545-35-G-EZ-K is going to be due to the size of the outside of the hub. If you look at the picture I have attached, you will see it compared to the # AKIHUB-545-2-G-EZ-2K, which will fit a 10" wheel.
However, the # AKIHUB-545-2-G-EZ-2K is rated for a 2,000 pound axle and there are no hubs that we carry that will fit both a 10" wheel and a 3,500 pound axle. This is due to the bearings for the hubs and the wheels just being too small. Unfortunately, this will also go for the parts you ordered.
What are you wanting to install this on? I have been doing this for over a decade now and I have never had anyone ask for a combination of these sizes.
Product Page this Question was Asked From
Kenda 205/65-10 Bias Trailer Tire with 10" White Wheel - 5 on 4-1/2 - Load Range E
- Trailer Tires and Wheels
- Tire with Wheel
- Bias Ply Tire
- Load Range E
- 205/65-10
- 10 Inch
- N - 87 mph
- 5 on 4-1/2 Inch
- Steel Wheels - Powder Coat
- Kenda
more information >
Continue Researching
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Search Results: trailer tires and wheels
- Shop: Lippert Complete Bearing Kit for 2,200-lb Trailer Axles - L44649 Bearings, L44610 Races
- Shop: Trailer Idler Axle Beam with Easy Grease Spindles - 60" Long - 2,200 lbs
- Shop: Kenda 205/65-10 Bias Trailer Tire with 10" Galvanized Wheel - 5 on 4-1/2 - Load Range E
- Video: Installing the etrailer Easy Grease Trailer Idler Hub Assembly
- Search Results: emergency trailer brake
- Search Results: spare tire mount
- Search Results: trailer lights
- Article: Trailer Lighting Requirements
- Q&A: What Rotors Fit With the DeeMaxx Trailer Idler Hub # DE36VR?
- Q&A: Recommended Hubs and Rotors for an EZ Loader Trailer
- Shop: DeeMaxx Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Stainless Steel - 3,500 lbs
- Shop: Kodiak Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet and KodaGuard - 3,500 lbs
- Shop: Kenda 205/65-10 Bias Trailer Tire with 10" White Wheel - 5 on 4-1/2 - Load Range E
- Video: Checking Out the Optronics Trailer Light Kit for Trailers over 80" Wide
- Search Results: shorelander trailer lights
- Search Results: hba~16
- Search Results: led wireless tow light kit
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: Recommended Wheel And Tire Setup For 3,500Lb Trailer Idler Hub AKIHUB-545-35-G-EZ-K
- Video: Breaking Down the Optronics Trailer Light Kit for Trailers over 80" Wide
- Article: How to Measure a Trailer Axle
- Video: Comprehensive Review: Single-Axle Trailer Hangers for Double-Eye Springs
- Q&A: Recommendation for LED Waterproof Corrosion Resistant Rescue Boat Trailer Lights
- Q&A: What is the Difference Between Over 80 inch and Under 80 inch Trailer Tail Lights
- Q&A: LED Light Kit for Trailer Over 80 Inches Wide
- Video: Detailed Breakdown of the Yates Y-Style Bow Stop for Boat Trailers
- Article: How to Tell the Weight Rating of a Trailer Axle
- Shop: Vehicle Tow Bar Wiring



Ryan H.
10/15/2025
My bass buggy pontoon boats trailer. I wanted smaller 4.5 lug spacing. I bought matching part numbers to what is on it now