Dexter Brake Actuator that Can Fit In Place of Titan Aero 7500

Question

Question:

I’m looking for a replacement brake actuator for an Aero 7500 bolt on. This is for a tandem trailer with disc brakes and a 3x5 straight tongue. Will the dexter dx56fr work and are there any pictures or installation instructions for mounting it? Thanks

asked by: Jim

0

Expert Reply:

The Dexter DX7.5L # DX56FR would be a great option to replace the Titan Aero 7500 that you have now. This also was designed to fit a 3 inch by 5 inch tongue and will work great with a tandem disc setup like you have as well.

expert reply by: Jameson C

0

Answer 1

I recommend using the Dexter DX7.5L A-60 Brake Actuator w Electric Lockout #DX29FR to replace the Titan Aero 7500 you currently have. The top holes are 3" apart on center which should match with what you currently have, but you'll need to…

view full answer...

Answer 2

The best option we can offer would be a full replacement for the Titan Aero 7500 Brake Actuator. For this, I recommend the Dexter DX7.5 Drop-N-Go Brake Actuator part #099-175-20. There are indeed replacement parts for the old Titan Aero 7500 Brake…

view full answer...

Answer 3

You are going to need to replace your Titan Aero 7500 Disc Brake actuator as Dexter has discontinued the T4875700 and all the replacement parts for the Titan Aero surge actuators. I recommend upgrading to the Dexter DX7.5L A-60 Brake Actuator…

view full answer...

Answer 4

Your outer bearing, LM12749, is not a trailer bearing that we carry at this time. I checked online and found that the outer bearing you need will have a 0.8656 inch inside diameter for your spindle. Because of that we aren't going to be able to…

view full answer...

Answer 5

That's a really good question, and there is a difference between the 7,500 lb Dexter DX7.5L A-60 actuators for disc brakes; the differences are both in what they fit, as well as their length. - 14" Long & Top-Mounted For 3" Wide…

view full answer...

Answer 6

The Dexter DX7.5L A-60 Actuator #DX56FR you have is designed to be mounted on the end of the trailer frame as seen in the image below. Based on how your actuator was mounted the Actuator #DX89FR would best install like your current actuator. If you…

view full answer...

Answer 7

The distance between the mounting holes of the Dexter coupler part #DX56FR is 3 inches so it would bolt right up to your trailer. For a manual lockout you could use with this you'd want part #DX94FR. Standard brake line kits like the part #DM5424…

view full answer...

Answer 8

For a Four Winns Boat Trailer with Titan Aero 6000 Surge Brake Actuator, I recommend replacement using the Titan Zinc-Plated, Leverlock Brake Actuator part #099-175-20 which is ready to go as is and will be a great fit. The reason I recommend…

view full answer...

Answer 9

Hello Gregg, I think I can help shed some light on what is going on. Basically, there are two ways to stop surge brakes from actuating when backing up the trailer. The first and most popular way to do this is to use a surge brake actuator with a…

view full answer...

Answer 10

The main difference between The Dexter Inner Membrane #DX99FR and The Dexter inner Membrane #DX39FR is that the #DX99FR is for a tandem axle with disc brake setup. The #DX39FR is for a single axle with disc brake setup. Both Dexter membranes have a 2…

view full answer...

Answer 11

Hey Adam, thanks for the information. The Dexter Brake Actuator with Manual Lockout item #T63FR is going to be a pretty comparable replacement to your Titan Aero-6000. It works with a 2" hitch ball, fits a 3" wide tongue, and has a 7,500…

view full answer...

Answer 12

I will answer you second question first. The difference between the three Kodiak Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2" is the rotor finish. The differences are as follows: part # K2HR35D, has a Dacromet coated hub-rotor part…

view full answer...

Dexter Brake Actuator that Can Fit In Place of Titan Aero 7500

Product Page this Question was Asked From

Continue Researching