Replacement Key & Lock Core For Rhino-Rack

Question

Question:

lost keys for rhino rack removal need replacement

asked by: Vincent V

0

Expert Reply:

For Rhino-Rack accessories you'll need to replace the entire lock core for new keys. For example, you'd need the Rhino-Rack Masterkey Lock Barrels # RRRK062-2 for key number 062 or Rhino-Rack Masterkey Lock Barrels # RRRK118-2 for key 118.

I have added a link below to our options for replacement Rhino-Rack keys and lock cores.

expert reply by: Kyle S

0

Answer 1

Rhino Rack has lock cores that come with each component so if you bought the product new, I recommend reaching out to the manufacturer for a set of keys. If you bought the product used or it came with a vehicle, then to get a new key for your Rhino…

view full answer...

Answer 2

Sorry, John. We do not have any Rhino-Rack keys for the lock code 290. Typically the best route to go is changing all your Rhino-Rack lock cores to their more premium keys so you can have all your accessories keyed alike as well. Here is a list of…

view full answer...

Answer 3

Hey Scott, if you check out the attached video on this page you'll see our installer walk you through how to remove Rhino Rack lock cores so that you can install new ones.

view full answer...

Answer 4

I'd be happy to help you with that. The correct replacement key is part #THKEYN052, which you can order using the provide link.

view full answer...

Answer 5

Thanks for the picture of your roof rack feet. In it I can see that your lock core number is 062 which means the Rhino Rack Masterkey Lock Barrels #RRRK062-2 that you referenced comes with keys that would unlock what you have now as that is the same…

view full answer...

Answer 6

I have a solution for you. First, though, you need to know that Rhino-Rack does not make just replacement keys. They are sold with their lock cores. To get your 062 key, you will need the Rhino-Rack Masterkey Lock Barrels, part #RRRK062-2. I suggest…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 12

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Replacement Key & Lock Core For Rhino-Rack

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching