Where is Brake Controller Install Port on 2022 Ford Explorer for Redarc Tow Pro Elite

Question

Question:

Where is the Connection for the trailer brake controller located on the 2022 Ford explorer Timberline.The vehicle has a four 4 and seven pin connector installed from the factory. Thank you I am frustrated with FMCO.

asked by: Jim P

0

Expert Reply:

To install the Redarc Tow Pro Elite Brake Controller part # RED44FR that you referenced the correct harness is the part # RED87FR for your 2022 Ford Explorer Timberline and you'll find the correct plug on your vehicle under the dash by the steering column.

expert reply by: Jameson C

0

Answer 1

The biggest difference between the two Redarc brake controllers is that the Tow-Pro Elite #RED44FR has a proportional control and user controlled mode you can switch between, while the Tow-Pro Liberty #RED24FR has just the proportional mode. The…

view full answer...

Answer 2

I would be happy to help you. On your 2021 Ford Explorer the connector is located under the dash, above and to the right of where the driver's right knee would be. The connector will be rectangle, grey in color, and can sometimes be taped to…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…

view full answer...

Answer 6

To install a Redarc Tow Pro Liberty in your 2023 Toyota Tacoma Sport you will need the following parts: Redarc Tow-Pro Liberty Brake Controller item #RED24FR Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item #RED99FR…

view full answer...

Answer 7

For your 2024 Nissan Frontier I recommend the Redarc Tow-Pro Liberty Brake Controller #RED24FR. I like the Liberty because it is simple, reliable, and looks great in any vehicle. The main unit installs behind the dash, so only the control knob will…

view full answer...

Answer 8

Hey Jonathan, congrats on the new truck! The Universal Mounting Panel item #331-TPSI-001 is what you'll need to install the control knob of the Redarc Tow-Pro Liberty item #RED53CR in your 2026 Nissan Frontier SV. It measures 1-8/16" tall x…

view full answer...

Answer 9

Hey Scott! Your 2026 Ford Ranger may or may not have a brake controller port/plug, even with the tow package. There will be four wires coming out of a large wire harness by the driver side firewall, left of the brake pedal, which can be wired to the…

view full answer...

Answer 10

The Redarc Tow-Pro Liberty #RED24FR is the way to go over the Elite #RED44FR as you get the nicer functions of the Elite at a lower price. The Elite has the ability to be the more preferred proportional style of controller as well as a time-delayed…

view full answer...

Answer 11

Welcome back Jake! To replace your 48209-0650 Coleman Mach 15 Power Saver/Quiet, I recommend the Coleman-Mach Quiet Series Mach 15 RV Air Conditioner item #CM86GR, along with Coleman-Mach ChillGrill Air Distribution Box item #CM36RR, and the Single…

view full answer...

Where is Brake Controller Install Port on 2022 Ford Explorer for Redarc Tow Pro Elite

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching