How to Tell if MORryde Premium Rubber Suspension Kit Will Fit Triple Axle Trailer

Question

Question:

Will this work for my trailer?

asked by: Javier

0

Expert Reply:

The MORryde Premium Rubber Suspension Kit # MR72TR is a great solution for triple axle trailers using the Correct Track Trailer Alignment and Lift Kit # RR55QX, and if your trailer has a 35" wheelbase. Wheelbase is measured from the center of one axle to the center of the next axle so that axle-to-axle measurement needs to be 35" for this to fit.

If you're also needing to upgrade your bolts and shackles we have kit # MR38ZR for 2-1/4" shackle straps or part # MR48ZR for 3-1/8" shackle straps.

Attached are review videos of the MORryde kits for you to check out!

expert reply by: Jon G

0

Answer 1

I do see your 2015 Keystone Carbon 327 5th wheel toy hauler comes equipped with 7,000lb axles. I recommend going with the AllTrek 4000 Equalizers #MR29DR since you are replacing your suspension components. This is a superior equalizer to the…

view full answer...

Answer 2

I recommend upgrading to the MORryde Shock Absorbing Suspension Equalizers #MR59ZR for your triple axle 5th wheel camper. These are designed for axle spacings of 33". You will need to select one of the wet bolt kits from the list below. There…

view full answer...

Answer 3

Hello Sue, thanks for reaching out. We should certainly have the parts you need, but there is no way to look up your camper to know exactly what leaf springs and shackles you need. RV/Camper manufacturers just are not that specific with their online…

view full answer...

Answer 4

Hey Martin, Yes, I can verify that the 1-3/4 inches that you're seeing from Measurement D is accurate for the 24-7/8" Long 7-Leaf Double-Eye Spring for 8,000-lb Trailer Axles #DX74XR. Just an FYI there is another version of this leaf spring…

view full answer...

Answer 5

First off by moving to heavier leaf springs you will cause the trailer to want to bounce more which could cause another set of issues. To ensure the length of the springs are correct I can use the information off the axle tag located on the center of…

view full answer...

Answer 6

I recommend going with one of the 2-1/4" shackle kits. You will need either the MORryde Suspension Upgrade Kit for Triple Axle Trailers - 2-1/4" #MR86ZR if you have standard hangers or the MORryde Suspension Upgrade Kit for Triple Axle…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Answer 12

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

How to Tell if MORryde Premium Rubber Suspension Kit Will Fit Triple Axle Trailer

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching