Adjustable Bracket And Coupler Recommendation For 7000 Lb Trailer

Question

Question:

Hi, I have a Fulton coupler that I cannot find parts for. The locking mechanism is broken and is secured by 4 bolts 1inch from top to bottom bolt on center and 2.25inch from front to back on center. I have no problem replacing the entire assembly but wanted to make sure that there were not parts available. I have attached a couple of pictures. Almost forgot to add that I am not against a weld on adjustable coupler. The trailer can haul 7k lbs. Thanks :

asked by: Paul P

1

Helpful Expert Reply:

We do carry some replacement parts for couplers, however we do not carry replacement parts that would work for the coupler you have provided pictures of. We do have some options for you to consider.

For an adjustable channel coupler, I recommend the Bulldog Cast Head Coupler, part # BDA256C0317. This coupler has fits a 2-5/16 inch ball. The channel I would recommend for this coupler is the Bulldog 5-Position Adjustable Channel Bracket for Cast Head Couplers, part # BDAC5000300. This channel allows 8 inches of vertical adjustment and has a 24000 lb weight capacity.

For an adjustable bracket and coupler that uses a 2 inch ball, I recommend the Bulldog Cast Head Coupler, part # BDA2005C0317. This coupler has a 5-position bracket and has an 8 inch adjustable height, with a weight capacity of 8000 lbs.

Since the photo you sent shows the trailer tongue measures 2-1/2 inches by 2-1/2 inches, the couplers we offer have a reduced weight capacity. One coupler like this I recommend is the Husky Channel Tongue Trailer Coupler, part # HT87074. This is made of corrosion resistant zinc-plated steel, fits a 2 inch ball, and has a weight capacity of 3500 lbs. It is a bolt-on or a weld-on installation. I have attached a photo with some of the dimensions shown for this coupler.

Please be sure to have the installation welded by a experienced welding shop.

I have attached a link to a helpful article about trailer couplers.

expert reply by: Jeffrey L

1

click to enlarge

Answer 1

On the Pro Series Adjustable-Channel Coupler, #PSA256S0303, the back of the coupler that fits in the channel mounted to the trailer measures 2-7/8 inches wide. The bolt holes are 2 inches apart on center. Mounting hardware is included with this…

view full answer...

Answer 2

For a very similar coupler to your existing Dico 17550 model I recommend taking a look at the Titan Weld-On Coupler #T1755000. This weld-on coupler is designed for 3 inch wide trailer tongues and has a weight capacity of 21,000 pounds. I have…

view full answer...

Answer 3

We do have a very similar replacement coupler that is rated for 21,000 GVWR, and it is the Titan Bolt-On Coupler #T4855300. The angle that your photo was taken I can not tell if it is a 2 or 3 hole adjustable coupler, but this Titan part is a 3 hole…

view full answer...

Answer 4

While we do have a bolt-on option, the Demco Hydraulic Brake Actuator - Drum - Primed - 12" Adjustable Channel Down - 8,000 lbs #DM8759432 is actually a weld-on actuator. If you are looking for a bolt-on option, there are a couple similar…

view full answer...

Answer 5

I went to our warehouse to get the Demco brake actuator and provide you several measurements. The overall length is 23-3/4 inches and 5-3/4 inches from the channel to outer housing. The 3 center eye to eye measurements are 1.34 and 2-inches on the…

view full answer...

Answer 6

First I want to make sure you verify your channel mount for the Demco Trailer Coupler #DM14040-81 has a 21K or larger capacity as often times they are less like the Demco #DM15349-52 which often times people look at and think it is a channel mount…

view full answer...

Answer 7

Determining between piano hinges, #H300 3 Inch Wide Steel 6 Ft Long or #SH200 2 Inch Wide Stainless Steel Hinge 6 Ft Long, depends what features you find more important for your application. The #H300 hinge will be stronger in that it is an inch…

view full answer...

Answer 8

Thinking about making the switch to disc brakes, always a great idea! We definitely have the parts to make the switch. Unfortunately, I don’t have a database showing what components are installed on each camper (I wish one existed, it would make my…

view full answer...

Answer 9

The Shocker Hitch Air Cushioned Trailer Coupler part #SHK73RR will require an adjustable channel on the trailer in order to mount. An example of this is the Trailer Tongue Vertical Channel Weld-On Adaptor part #SHK95RR which requires removing the old…

view full answer...

Answer 10

I went out to the warehouse and measured the bolt holes on actuator #T4747220. The 2 larger holes are spaced 5 inches apart on center. I have included a picture showing this and other measurements for you.

view full answer...

Adjustable Bracket And Coupler Recommendation For 7000 Lb Trailer

Featured Help Information

Miscellaneous Media

Continue Researching