Swagman Ramp and Bridge For Current, E-Spec, and G10 Bike Racks

Question

Question:

Do you stock the bridge and ramp accessory for this Swagman Current Bike Rack?

asked by: Glenn J

0

Expert Reply:

We do carry the Swagman Ramp and Bridge # S32YR for the Swagman Current Bike Rack # S64678. This will also fit the Swagman E-Spec # S94FR and G10 bike racks.

expert reply by: Bud M

0

Answer 1

The highest-rated trailer hitch available for your 2010 Scion xB is a Class II hitch from Curt: - Curt Class II Trailer Hitch Receiver #C12490 The Class II rating means it is stronger than a Class I, but it still has a 1-1/4" receiver. Since…

view full answer...

Answer 2

If you are wanting to carry your two 60 lb ebikes on your 2015 Scion XB you need to get the Class II hitch from Curt #C12490. This will give you the most amount of weight capacity. The Thule T2 Pro XT #TH83JV needs to be used with a class III hitch…

view full answer...

Answer 3

Gordon, the difference between the Swagman E-Spec #S94FR and the Swagman Escapee #S39SR is that the E-Spec has a higher capacity, is about 10 lbs lighter, but will only work with a max wheelbase of 48" (compared to the Escapee which can handle…

view full answer...

Answer 4

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 5

The Curt Trailer Hitch Receiver part #C12490 which is a fit for a 2012 Scion xB does indeed have a 350 lb weight capacity. However, when you use any sort of 1-1/4" to 2" hitch adapter like the Hitch Adapter 1-1/4" to 2" Trailer…

view full answer...

Answer 6

I do see your Aventon Level 2 bike has a weight of 54lbs. Since you are using the Curt Receiver #C12490 on your 2013 Scion xB and being a 1-1/4" receiver I recommend the Yakima OnRamp #Y28DJ as it can support bikes up to 66lbs each and has a…

view full answer...

Answer 7

I do have a few different bike rack options for you, but since you are wanting to carry a pretty hefty E-Bike and the highest rated trailer hitch receiver (the Curt #C12490) is only a 1-1/4 inch receiver you do have a very limited range of choices.…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 11

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 12

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Swagman Ramp and Bridge For Current, E-Spec, and G10 Bike Racks

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching