Recommended Headache Rack For a 2023 GMC Sierra 3500 Denali

Question

Question:

I have a 2023 GMC Denali 3500. Need a rack that will not obstruct camera views on rear of cab brake light. Which would you recommend?

asked by: David B

0

Expert Reply:

Hello David.

I recommend the Westin HLR Headache Rack # W55RV for your 2023 GMC Sierra 3500 Denali. This rack has the opening for the 3rd brake light and camera. It also is the lest obstructive for your view compared to the Westin HDX # 57-8025. The HLR also does not require drilling like the other racks.

expert reply by: Bud M

0

Answer 1

Hi William! For the best sliding hitches that will fit that puck system in your 2023 GMC Sierra 3500 short bed, you are going to want to check out the following two American made options: B&W Companion OEM 5th Wheel Hitch w/ Slider for Chevy/GMC…

view full answer...

Answer 2

Hey Ryan, the Curt CrossWing Lightweight 5th Wheel Trailer Hitch part #C86JR is compatible with the Adapter Rails for Curt 5th Wheel Hitch part #C88KR. The fifth wheel hitch simply drops into the adapter and secures with hitch pins and then the…

view full answer...

Answer 3

Hi Claude; the best auto slide hitch for your 2024 Chevy Silverado 2500 Duramax is the Demco Autoslide 5th Wheel Hitch w/ Slider #DM79GV. This features a single-piece jaw for 360-Degree jaw-to-king-pin contact and a secure connection along with a…

view full answer...

Answer 4

Hello Rege, thanks for reaching out. It sounds like you are definitely on the right track with your thinking and with your assessment and comparisons of the products you mentioned. For the 5th wheel hitch, the Demco Auto slide #DM29GV and the B&W…

view full answer...

Answer 5

I recommend the Demco Hijacker 18K Autoslide 5th Wheel Trailer Hitch w/ Slider part #DM8550034 with the custom rails part #DM8552011-71 for the 2015 GMC Sierra 2500 short bed. The Hijacker is designed so you don't have to get out of the truck to…

view full answer...

Answer 6

The Reese hitch you have will be compatible with ISR rails like the B&W #BWRVK2505. These custom-fit brackets are designed to work with factory holes in your Sierra's frame to make the installation easier and much faster. If you plan on…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

Hey Kent! Your Alliance Avenue already has some great suspension components with the MORryde CRE3000 equalizers, wet bolt kit, and Rota-Flex pin box. I wouldn't replace any of those unless you're experiencing a specific problem. The next…

view full answer...

Answer 10

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 12

Hey Jerry, GM moved the placement of their puck systems starting with 2020 models so you are correct that the pucks would have the hitch not sit directly over the axle. GM did the math and made sure that this placement wouldn't adversely affect…

view full answer...

Recommended Headache Rack For a 2023 GMC Sierra 3500 Denali

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching