Correct TruXedo Stake Pocket Covers for 2022 Ram 3500

Question

Question:

I have a 2022 Ram with an 8 ft bed and it says in your QA that the part is TX86QV, but when I click on this and the description pops up, it clearly states it does not fit my truck. Please clarify and can you confirm it fits the 2022s. NOT CONFIRMED TO FIT 2022 Ram 3500 thanks

asked by: Carlos G

1

Helpful Expert Reply:

I checked with Truxedo and the TruXedo Stake Pocket Covers part # TX86QV are a fit for a 2022 Ram 3500.

expert reply by: Conner L

1

Answer 1

I reached out to TruXedo and the TruXedo Stake Pocket Covers #TX86QV will fit your 2022 Ram 3500 with factory bed side covers. According to my contact, these are used with bed side covers all the time and there are no issues even when it isn't…

view full answer...

Answer 2

The Replacement Tail Clamp Assembly for Extang Solid Fold and Trifecta Tonneau Covers - Qty 1 #EX1035 is the correct replacement part unless you have a 1999 or newer Ford Super Duty truck which will instead use #EX1042. To install the replacement…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

Do you have a crew cab or a regular cab? Torklift is really particular with their fits but with that last bit of info I should be able to see what solution would work.

view full answer...

Answer 5

Hey Chris, Our Fitguide can be a bit confusing sometimes. Essentially the whole category is broken down into whether they fit diesel or non-diesel models. Since the EcoHitch Hidden Front Mount Trailer Hitch Receiver #EH37FR fits both gas and diesel…

view full answer...

Answer 6

Thanks for all of the information Daniel! The Hellwig Big Wig Rear Anti-Sway Bar item #HE24MR will definitely fit your 2024 Ram 3500 diesel. This will work with both 2WD and 4WD models and is also compatible with the dually models as well. I have…

view full answer...

Answer 7

Hey Sam! If your Ram truck has the factory puck system you won't need a set of rails to install an Anderson Hitch. The Andersen Aluminum Ultimate 5th Wheel Connection 2 Gooseneck version item #3220 will attach directly to the gooseneck ball. If…

view full answer...

Answer 8

Hi Andrew; the Hellwig Big Wig Rear Anti-Sway Bar #HE24MR is specifically designed for Ram 3500 models with a diesel engine like yours. It is also a fit for the dually models so you can install it on your 2024 Ram.

view full answer...

Answer 9

Hey Randy, we have what you need but you will need to measure the width of your pin box to determine which capture plate you need. If it's 13-3/8 inches wide you'd want the part #PUL26RR or if it's 13-5/8 inches you'd need the part…

view full answer...

Answer 10

Thank you for the photo of your 2016 Ram 3500's bed rail which sits 59-inches above ground. You are correct that the recommended minimum clearance between a bed rail and the underside of the trailer's overhang is 5 to 6-inches, as shown in…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

Hey Dan, thanks for reaching out! If you have the Progressive Dynamics 4000 Series System #PD4060K then it looks like removing the black and white wires will disconnect the converter section (see attached photo), which charges the battery. I do…

view full answer...

Correct TruXedo Stake Pocket Covers for 2022 Ram 3500

Product Page this Question was Asked From

Continue Researching