Titan Chain Heavy Duty Alloy Snow Tire Chains For a 265/75-16 Tire Size

Question

Question:

It is not listed but should this fit a 265/75 R16 alright?

asked by: Casey R

0

Expert Reply:

For a 265/75R16 tire you will need the Titan Chain Heavy Duty Alloy Snow Tire Chains # TC2228SHD. The # TC74FR will not fit this particular tire size.

expert reply by: Bud M

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...

Answer 4

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 5

Hey Ian, great to hear from you again! The differences between the MORryde CRE3000 #MR87ZR and AllTrek 4000 #MR89DR that fit a 33" wheelbase is the height between the hanger and equalizer bolts, and the amount of travel the suspension style will…

view full answer...

Answer 6

Hi Steve; the factory hitch on the 2013 Tacoma has the bumper brackets integrated into the hitch. You can replace it with the etrailer Trailer Hitch #e98850 but you will have to remove the old hitch and find new bumper brackets to complete the…

view full answer...

Answer 7

Hey Kyle! The Pacbrake Alpha HD Air Bag Suspension Kit #PB22RV installs in the same location as most fifth wheel and gooseneck brackets. I would expect to have to do some drilling to install these with your B&W Turnoverball. Instead, I recommend…

view full answer...

Answer 8

Hello Bob, thanks for reaching out. We do have a lock that will work with the etrailer Adjustable 2-Ball Mount #e66PR. For that I recommend the following: - etrailer Hitch Receiver Lock for 2" and 2-1/2" Hitches - Flush - 3-5/8" Span -…

view full answer...

Answer 9

Yes, it does John. The OBD2 is the diagnostics port that repair shops and inspection places use to connect to your 2012 Tacoma's computer. The electric brake control harness on your 2012 Toyota Tacoma will be located underneath the drivers side…

view full answer...

Answer 10

The aftermarket hitches for a 2011 Toyota Tacoma don't fit alongside the factory installed hitch; some trucks have hitches you can add on to OEM hitches that fit underneath the original. So I can't see any reason why you wouldn't be able…

view full answer...

Titan Chain Heavy Duty Alloy Snow Tire Chains For a 265/75-16 Tire Size

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching