Do Optronics Adhesive Trailer Reflector RE52AB Have Adhesive Backing

Question

Question:

are the reflector lights that I am trying to order adhesive on the back

asked by: Frank M

0

Expert Reply:

The Optronics Adhesive Trailer Reflector # RE52AB that you referenced do have an adhesive backing for an easy stick-on application.

expert reply by: Jameson C

0

Answer 1

The Red and Amber Self-Adhesive Reflector Kit #RE52ARK are 4 inches long, 1-1/4 inches tall, and 3/8 of an inch thick. I have linked a video that shows this for you.

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

Hey Lawrence, thanks for reaching out. The Curt T-Connector #C56040 is correct for the 2025 Subaru Forester Hybrid. The factory harness plug should be in the rear cargo area behind the driver side access panel. If you remove the trunk floor covering…

view full answer...

Answer 4

Hey Nelson, welcome back and congrats on your new SUV! We get our information directly from Curt and their item #C13409 and item #C47HR hitches fit all models of the 2025 Subaru Forester including the hybrids. This is why we don't list a hybrid…

view full answer...

Answer 5

Hello Wes, Great question! The only hitch that we have that will not interfere with the sensor at all for the 2025 Subaru Forester is the EcoHitch Hidden Trailer Hitch Receiver - Custom Fit - Class III - 2" #306-X7391. If you go to the product…

view full answer...

Answer 6

Hey Troy! I went ahead and attached the installation instructions for the #TS64ZR as pictures below. You will have to lower the underbody panel, lower the exhaust, and remove/drill holes in the heat shield for installation. Most of the hitches for…

view full answer...

Answer 7

Hey Craig. The etrailer Hitch item #e83ZR has been confirmed to fit the hybrid model of the 2025 Subaru Forester. This custom fit class III hitch has a 2" receiver so it will give you the most capacity for towing a trailer or hauling an…

view full answer...

Answer 8

The main difference between these three hitches is going to be the looks and install time. EcoHitch Hidden Trailer Hitch Receiver - Custom Fit - Class III - 2" #306-X7391. Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C13409.…

view full answer...

Answer 9

I would be happy to clarify! You are correct that for your 2021 Subaru Forester there are two different Class III trailer hitch receivers available, the Curt #C13409 and the Curt #C47HR. The main difference between these two hitches is the #C13409…

view full answer...

Answer 10

Hi Clayton! If you are looking for the best hitch that will not mess with the foot sensor on your new 2025 Subaru Forester and will last the longest, you are looking for the EcoHitch Hidden Trailer Hitch Receiver - Custom Fit - Class III - 2"…

view full answer...

Answer 11

Hello Len, thanks for reaching out. You are on the right track. The Trailer Mate Trailer Hitch Receiver #TMT47FR will indeed fit the 2025 Subaru Forester Hybrid. It has a 300 lb tongue weight capacity so that'll work great for a bike rack and a…

view full answer...

Answer 12

What is your current tire size? The only tire size I saw mentioned online for a Flagstaff 176LTD is ST145-12 (also commonly referred to as 145/80-12). We do offer that size in a radial as part #AM10130 which is a load range D with a 1220 lb per…

view full answer...

Do Optronics Adhesive Trailer Reflector RE52AB Have Adhesive Backing

Product Page this Question was Asked From

Continue Researching