Front Mount Trailer Hitch For A 2019 Ford F-350 Super Duty 4WD

Question

Question:

Will the Curt Front hitch receiver mount on a 2019 F350 4WD Dual rear axle?

asked by: Paul P

0

Expert Reply:

Yes, The Curt Front Mount Trailer Hitch Receiver # C31078 is confirmed to fit your 2019 Ford F-350 Super Duty 4WD with dual rear axle.

The hitch has an easy, bolt-on installation with no welding required. It has a gloss black powder coated finish that is over steel that helps resist corrosion. The hitch has a line pull up to 9,000 pounds and has a vertical load up to 500 pounds. I would recommend checking your vehicle's manual to find the proper weight capacity for your 2019 Ford F-350 Super Duty.

expert reply by: Noah E

0

Answer 1

Hey Steve, we have the EcoHitch front hitch part #EH54QR as a confirmed fit for your 2025 Ford F-350 dually.

view full answer...

Answer 2

I found the answer page that Kyle made about the Curt front hitch #C31078 and found that Kyle did list that this hitch does NOT fit a dually model. Now that said I looked further into why the front hitches don't fit the dually models and…

view full answer...

Answer 3

I attached pictures that show how the Curt front hitch #C31078 and the Draw Tite #65076 looks when installed and you can tell that the Draw Tite sits up a bit higher since it comes through relative to the curve in the air dam.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

Hey Douglas! The correct Gen-Y gooseneck pin box for your 2022 Forest River Cardinal Red is the #GY33GR. This fits the Rhino bolt pattern and is rated for trailers with a GVWR of 7,275-16,360 lbs. You will also need safety chains #GY49GR to complete…

view full answer...

Answer 12

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Front Mount Trailer Hitch For A 2019 Ford F-350 Super Duty 4WD

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching