Replecement Jack Pad For SnapPad HiWay 8 Jack Pads # SP34FR4

Question

Question:

I bought a set of HiWay8 Jack Pads from you and have lost one. Do you sell single pads?

asked by: John R

0

Expert Reply:

Yes, we do have the Replacement Pad # SP34FR for your SnapPad HiWay 8 Jack Pads # SP34FR4 on your RV.

expert reply by: Bud M

0

Answer 1

Other than saying that the air bags need to be kept between 5 and 100 psi, Firestone does not offer much in the way of specifics. The instructions mention that as a general rule of thumb, 1 psi will support approximately 40 lbs of load. Your best bet…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 4

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 5

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 6

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 7

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 8

Hey Paul! The PullRite SuperGlide #PUL43RR (2714) and #PUL73RR (2914) do weigh the same. The main difference is the capacity, which is going to come from the base of the 5th wheel hitch. Since your 2027 Keystone Cougar 316RLS has a GVWR of 12,900 lbs…

view full answer...

Answer 9

Hey Bill! You can swap out the 4-way for a 6-way and use a 7-way to 6-way adapter which will allow you to add the charge line #DM66VR. The Roadmaster 7-Wire to 6-Wire Flexo-Coil Kit #RM-146-7 has what you need to complete the installation. Where are…

view full answer...

Answer 10

Not another one! Just kidding Dirk! I was in the Marines I enjoy these conversion questions on the M1101 trailers. I'd be more than happy to list the parts you need, along with quantity, and confirm compatibility. 1 - Timbren Axle-Less Trailer…

view full answer...

Answer 11

Hey Cass, can you measure the feet of your 2024 StarCraft Super Lite? The SnapPad Mini Jack Pads for Travel Trailers w/ BAL - 5-1/2" Square Jack Feet #SN39FR is designed to fit 5-1/2 inch square feet which might be what you have but I don't…

view full answer...

Answer 12

Hey, Bill. If you’re not installing a supplemental braking system, like part #DM86VR, then the answer is no, you won’t need to install a charge line kit (part #RM-156-25). You will, however, want to double-check your owner’s manual for the exact…

view full answer...

Replecement Jack Pad For SnapPad HiWay 8 Jack Pads # SP34FR4

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching