Replaces 1 pad for your SnapPad jack stand pad system. Pad increases the surface area of the jack foot to help prevent sinking and provides added stability. Fits 8" square jack foot.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi there. I'm Michael with etrailer.com. Today, we're gonna take a quick look at this SnapPad replacement pad. This is going to replace one of the pads for your SnapPad EQ Stable jack pads for your Equalizer leveling systems with the eight inch square jack feet. So, if one of your pads has become lost or damaged, you needing to replace it so that everything is gonna be level again, this is gonna be an exact replacement for that original set, so it's gonna have all the same features, dimensions, and everything as the original. It is going to be for your eight inch jack feet.
So, you can see there, overall diameter is right about 11 1/2 inches. And same very sturdy rubber finish, so it's gonna help protect the concrete or anything that your feet are put on. It's gonna help protect your feet from rocks and that sort of thing. It's also going to help increase the surface area, so that your feet aren't going to sink into soft ground and that sort of thing. So, all the same features as the original.
So, if you are missing one for your set, this is gonna be exactly what you need. This is made here in the USA, so you can trust it's made to the high quality standards that we've come to know and trust for products that are made here in the US. So, if you are needing to complete your set, this is gonna be exactly what you need. That's gonna complete our look for today. Again, I'm Michael with etrailer.com.
Thanks for watching..
Customer Satisfaction Score:
87% were satisfied with this product
13% of customers were not satisfied
Ratings & Reviews
we had 4 of these when we changed to a newer 5th wheel we needed two more. These are the best things made. I like that they protect the metal feet. Easy to install.
Lost one of my leveler feet a couple trips ago. Got the new metal plate and then a single of the snap pad. A little soap and on it went. Note I now use loctite on the screw that holds the metal plate on the cylinder. Live and learn. Etrailer was great to work with.
Nice Tight fit so no worries about it falling off during travel. Pad adds grip to the jack foot to help keep RV in place when connecting and disconnecting. Nice product
Should help keep my tongue jack secure stacked on my plastic stacker blocks. Only time will tell for longevity. Wish they made a 5" round for my slide out supports
you need to explain that some motorhomes have different sizejack pads .imeasured rear jack it was 12 inches .the front was 10 inches, icalled and they would not swap so iiiiibought more pads for front. istill have 2 12 inch pads for rear idonot know when i will use , you did not offoer arefund or even a discount .not happy with poliicy .
Like the snap pads but I have lost two off the same jack. Made double sure this one is snapped on all the way around. Cant find anything wrong with the jack pad and I haven’t hit anything so maybe the last one wasn’t fully snapped on. Emailed snap pad snd asked them if I needed to look at anything else but they did not reply to my question.
I like the Snap Pads and haven’t had any issues with them. This was more difficult to install than other Snap Pads I have used. It wasn’t as easy as the instructions stated. Still happy with it.
A very NICE fit ! Works great and looks good too. Better to set on gravel (level) then just the metal plate. I have and others I know have had the round steel the plate break off ! If on a more sloped ground I still put some WOOD block under.
I quite using them plastic yelolow things- They bend and crack ! Jack pads and 2X wood BEST !
A trailer blowout in front of us caused the debris to go under our rig and hit our leveling jack. On impact it apparently pulled of one of the new snap pads. I was happy to discover that etrailer sold singles so we were not forced to buy a pair or set of four. The replacement arrived within a week and is exactly like the original we lost.
The SnapPad works as advertised, they stay securely to the jack foot if properly attached. I used dish soap to help secure the pad to the jack foot.
Single snap pad; matches the other three and fit as expected. I like Snap Pads so I didn’t hesitate when I lost one on the road to get another. I also like ordering from etrailer as the product arrives in a timely manner and with good communication. Prior to my recent trip I purchased a new Blue Ox replacement tow bar from etrailer and it too arrived quickly and performed well.
I already installed a set of Snap Pads on my trailer, they are awesome, just needed to put one on the tongue jack and now I'm all set. They are a "Snap" to install, pun intended.
Product arrived well packaged - just took a little longer for delivery than expected (a week) but I had also selected the free shipping option. I do love being able to track the package along it's route and also see which team member was responsible for which process. I can always trust e-Trailer.
We use this as a base for the nose wheel on our 18' trailer, to keep it from digging in on soft surfaces. And also to help the wheel chocks on downward facing sites: the wheel sits in the hole in the middle, and won't move.
Definite addition to the upgrade that I made increasing from 9” landing jack feet to 12” landing jack feet on our diesel pusher motorhome. These 12” snap pads will allow me to distribute load better over soft ground and not punch holes in the gravel or soft sites. Plus if I need to add blocks under feet, there will be no worrying about movement of jack feet off of the blocks.
Good quality construction with thick dense durable rubber. I bought this item for the foot of my RV tongue jack because I noticed the metal jack foot slipping on the jack support as I was lowering my RV. I have yet to test this product but the concept isn’t rocket science so I’m sure I’ll be pleased.
Good sturdy product that in my opinion is worth the money.
After aligning with leveling plates I had no problem with them snapping into place. Because my 9 inch plates were 4 years old and one was bent badly I replaced the plates with new ones first. These snap pads are so precise I didn't want to take a chance of them not snapping into place with a dished or bent plate. They worked out great and will help prevent damage to the new plates. I love them.
Item arrived super fast. Couldn’t wait to install, the weather outside is not really great for it but went for it anyway. Just as the directions saw, apply a little dish soap, and it didn’t snap on right away but after a few minutes it slide into place! Fit is perfect and I think it’s going to do exactly what I want it to do! I would definitely recommend this item.
PERFECT
Had to modify my 8” jack Ft to utilize the pads; 12” was perfect!!
Great company to work with and very efficient in getting my parts to me very quick!
Have not installed but They arrived right on time as expected.
Do you have a question about this RV Jack Pad?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.