Will Blue Ox Base Plate Lock Kit BX88177 Fit 2 inch Hitch

Question

Question:

I have a 2” receiver but the outside of the receiver is 2 1/2” will this work?

asked by: Cal

0

Expert Reply:

Yes, the hitch lock of the Blue Ox Base-Plate and Receiver Lock Kit # BX88177 does fit a 2 inch hitch that has a 2-1/2 inch outer width. Your hitch being 2-1/2 inches in width overall is pretty standard.

expert reply by: Jameson C

0

Answer 1

For your Blue Ox base plate, and your Blue Ox Avail Tow Bar #BX7420, you can use the Roadmaster Tow Defender Protective Screening #RM-4750. This is specifically designed to work with Blue Ox Tow Bars, and Blue Ox base plate brackets. I have included…

view full answer...

Answer 2

Hi Andrew; when you say hitch plate do you mean like a license plate holder or an actual hitch plate for towing? The etrailer High-Low Fixed Adapter #e85ZV is only rated for flat towing. If you wanted it to hold some kind of bracket for a license…

view full answer...

Answer 3

Hey Jay, the etrailer High Low adapter part #e85ZV that you referenced is designed for use when towing one vehicle with another vehicle. This is what flat towing is. This is a situation where there is basically no tongue weight as all since a vehicle…

view full answer...

Answer 4

Absolutely, Dave. You can fine-tune the Curt RVi Series 4 Portable Flat Tow Brake System #RVI44FR 's brake pressure and sensitivity right from the Bullseye monitor in your motorhome. In your case, some people try stepping down from Small SUV to…

view full answer...

Answer 5

Hey Doug! The Curt RVi Series Towed Battery Charger+ (TBC+) for Flat Towing #RVI74FR actually installs on the vehicle side so it will go in your 2025 Ranger Raptor. Your Jayco probably has a charge line already, which would be a 12V line running…

view full answer...

Answer 6

For your 2017 Jeep Wrangler Unlimited system to flat tow it behind your Itasca Ellipse, I recommend the following: For your base plates, I recommend the Blue Ox Base Plate Kit #BX1126 which will give the front of your Jeep a clean look. It has an…

view full answer...

Answer 7

The part #3034-P brake controller adapter plugs into the connector beneath your vehicle's dashboard. To reach the connector, first locate the notch in the access panel in the center of the dash, near the passenger side. Using a trim panel puller,…

view full answer...

Answer 8

Richard, I would need to know what year Honda Element you're asking about, but the 2007 FJ Cruiser you have plugged in can't be flat towed. If you can let me know what year and trim your Honda element is, I'd be happy to see if it can to…

view full answer...

Answer 9

The Blue Ox Alpha 2 model 7380 #BX7380 is an upgrade from the original Blue Ox Alpha Tow Bar model 7365. This is the model it replaced.

view full answer...

Answer 10

The Blue Ox Alpha tow bar, #BX7380, and all hitch mounted tow bars fit in a 2 inch receiver. So you would need a 5/8 inch diameter lock such as #BX8858. A Class II accessory would have a 1-1/4 inch shank whereas Class III accessories have 2 inch…

view full answer...

Answer 11

Blue Ox makes a great hitch lock with the part number #BX8858 but another really great option is the Blue Ox Base Plate and Hitch Lock set part #BX88101 which comes with locks for the base plate to the tow bar as well as the tow bar to the hitch all…

view full answer...

Answer 12

I just verified with Blue Ox for you that the correct cover for the Blue Ox Alpha 2 Tow Bar #BX7380 is indeed the cover you asked about: - Blue Ox Tow Bar Cover #BX8875 So the #BX8875 will 100 percent fit your Alpha 2 tow bar help keep it in the best…

view full answer...

Will Blue Ox Base Plate Lock Kit BX88177 Fit 2 inch Hitch

Product Page this Question was Asked From

Continue Researching