Replacement Hub for UFP H-1377 on Trailer
Updated 10/11/2022 | Published 10/10/2022
Products Featured in This Question
Question:
i have a wheel drum . ufp h-1377 zd5 no one knows what i need .its 4 1/2 xd 5 14 inch it oil bath front bearing is cmc L44549 no clue on rest other than it larger
asked by: Cathy H
Expert Reply:
The UFP H-1377 correlates to a Dexter #84 spindle, which is for a 3,500 pound axle. This will utilize an inner bearing # L68149 and an outer bearing # L44649 which has same inner diameter as the less common L44549 that you mentioned.
We do not have any oil bath hubs at this capacity but we do have grease hubs that are pre-greased that fit like the part # AKHD-545-35-EZ-K for a hub/drum with a 5 on 4-1/2 inch bolt pattern or the # AKIHUB-545-35-K which is an idler hub.
Product Page this Question was Asked From
Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Idler Hub
- EZ Lube
- L68149 / L44649
- Marine Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Video: Installing the etrailer Easy Grease Trailer Idler Hub Assembly
- Q&A: How to Determine Correct Replacement For UFP H1377 Hub
- Q&A: Correct Replacement for UFP H-1377 Trailer Hub
- Q&A: Comparing etrailer and CE Smith Idler Hubs for a 3,500 lb Axle
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-3/4 - Pre-Greased
- Q&A: Correct Replacement for TDE 46210 Trailer Hub
- Q&A: Replacement Hub for a UFP H-1377 on a 2004 Tahoe Boat Trailer
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Replacement Idler Hub For Old Boat Trailer With DICO 45264 Idler Hubs
- Article: Trailer Wiring Diagrams
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Trailer Lighting Requirements