Does 2-Speed Boat Trailer Winch 315-W2000D Come With Strap

Question

Question:

315-W2000D Does this unit come with a Strap?

asked by: John M

0

Expert Reply:

Yep, it sure does; the 20 foot strap is indeed included with the 2-Speed Boat Trailer Winch # 315-W2000D.

expert reply by: Kyle S

0

Answer 1

The bolt hole dimensions on the bottom of the Jif Marine Single-Speed Boat Trailer Winch with 20' Strap and Brake item #315-W2000D are 2.5 inches apart center to center. The attachment point to the center bolt is a slot that is 3.5 inches - 5…

view full answer...

Answer 2

The Single-Speed Boat Trailer Winch with 20' Strap and Brake #315-W2000D does not come with mounting hardware. This is basically because there are a wide variety of mounting applications so you'll need to supply your own mounting hardware,…

view full answer...

Answer 3

Hey Dave, I think you figured out your problem without realizing it - you need to have either lock washers or nylon lock nut in order to secure the CE Smith Bolster and Swivel Bracket Assemblies #CE10000G-4 to your trailer frame. Without hardware…

view full answer...

Answer 4

For a strap to use with the Dutton Lainson winch part #DL14627 the part #DL24249 would be an excellent option. This is a 25 foot long strap that has a 4k capacity. I attached a review video for you to check out as well.

view full answer...

Answer 5

The bottom plate for the Dutton-Lainson Hand Winch #DL14627 is 4-3/4" wide x 5-1/2" long, while the bottom plate of the #DL14725 is slightly larger at 4-3/4" wide x 6-5/8" long. The diameter of the spools are exactly the same at…

view full answer...

Answer 6

Shelby is no longer in business and would not be the same as Fulton; there are no ratchet repair kits available for Shelby so you'll need to replace your winch. Keeping in mind that a boat trailer winch has a boat-size-to-winch capacity that is…

view full answer...

Answer 7

If the gear is broken on your existing Shelby winch, I recommend simply replacing the entire unit, as Shelby is no longer in business and replacement parts are not readily available. To replace your Shelby 5408 model, I recommend the Dutton-Lainson…

view full answer...

Answer 8

Hey Sid, We do not have a direct replacement handle for your Shelby Winch 5408B. The closest handle that we have is the Fulton #F501109 which is going to be the same 9" long handle. The oval mounting hole is 1/2" with the flat portion being…

view full answer...

Answer 9

The Fulton XLT Swivel Trailer Jack #F141133 that you referenced comes ready to be installed and used. It would not require any greasing prior to initial use.

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Does 2-Speed Boat Trailer Winch 315-W2000D Come With Strap

Continue Researching