Do You Have A Replacement Handle For My Shelby Winch 5408B?
Updated 09/08/2025 | Published 06/12/2025
Products Featured in This Question
Question:
Hi, i have a Shelby Winch 5408B and need a replacement handle. I understand they are no longer in business. The mounting hole is 1/2inch and the flat part is 7/16inch with a 9inch handle.
asked by: Sid W
Expert Reply:
Hey Sid,
We do not have a direct replacement handle for your Shelby Winch 5408B. The closest handle that we have is the Fulton # F501109 which is going to be the same 9" long handle. The oval mounting hole is 1/2" with the flat portion being 3/8". I would double check your winch and see if something with those measurements will work for you.
If you see that the handle is not going to work, since Shelby is no longer in business, I recommend replacing the winch. Dutton-Lainson has a good replacement for that model # DL14627, which I would go with if the handle is not going to work for you.
Let me know if you look at your winch and think that handle will work for you.
Product Page this Question was Asked From
2-Speed Boat Trailer Winch with 20' Strap and Brake - 3,200 lbs
- Trailer Winch
- Standard Hand Winch
- Boat Trailer Winch
- Utility Winch
- 2001 - 4000 lbs
- Ratcheting Hand Crank
- Two Speed Winch
- Polyester Strap
- Jif Marine
more information >
Continue Researching
- Shop: Dutton-Lainson Hand Winch - TUFFPLATE Finish - Single Speed - 1,800 lbs
- Shop: Replacement Handle for Fulton Hand Winch - 9" Long
- Search Results: dutton~lainson trailer jack
- Search Results: 1/2" hitch pin
- Search Results: trailer bed
- Search Results: l bracket
- Search Results: dexter 660
- Shop: Hand Winch Strap with Safety Hook, 2" Wide x 25' Long - 4,000 lbs.
- Shop: Tonneau Cover
- Q&A: Should Lock Washers or Nylon Lock Nuts be Used for CE Smith Bolster and Swivel Bracket
- Q&A: Strap Recommendation for Dutton Lainson Boat Winch #14627
- Shop: Hand Winch Strap with Safety Hook, 2" Wide x 20' Long - 4,000 lbs.
- Search Results: wiring kits wiring
- Search Results: brake kit
- Video: Ultimate Overview of the CE Smith Side Angle Mounting Brackets for Boat Trailer Rollers
- Shop: Dexter DX6.6 Drop-N-Go Brake Actuator - Drum Brakes - 2" Ball - Zinc Plated - 6,600 lbs
- Q&A: Comparing The Dutton-Lainson Hand Winch # DL14627 And # DL14725
- Q&A: Replacement for Shelby Boat Winch
- Q&A: Does 2-Speed Boat Trailer Winch 315-W2000D Come With Strap
- Q&A: Recommendation to Replace Shelby 5408 Trailer Winch
- Shop: Replacement U-Bolt for 2" Wide, Square Axles - 1/2" Diameter - Zinc Plated
- Shop: CE Smith Side Angle Mounting Brackets for Boat Trailer Rollers - Galvanized Steel - 1 Pair
- Video: Ultimate Overview of the CE Smith Y-Style Bow Stop for Boat Trailers
- Video: Review of the Yates Y-Style Bow Stop for Boat Trailers
- Video: In-Depth Review of the Fulton Boat Trailer Jack w/ 2 Wheels
- Q&A: How To Determine Fit of the 3,200 Lb 2-Speed Boat Trailer Winch
- Article: Hand Winches
- Article: How to Choose the Best Winch for You, your Boat, and your Trailer
- Article: Basics of Tie Down Straps
- Article: Trailer Lighting Requirements
Nick S.
9/8/2025
Hey Sid, did you have a chance to check if the Fulton handle would work for your winch? If you're still looking for a solution, I'm happy to help.