Looking For Replacement Brakes And Hubs For An Al-Ko 7210 Axle
Updated 05/16/2024 | Published 05/13/2024 >
Products Featured in This Question
Question:
I have a trailer with brakes on only one axle. It is a tandem with AL-KO 7210 axles would the AKEBRK-7-SA brake assemblies work on those axles? Also would the AKHD-865-7-2-EZ-K Hub/Drum work?
asked by: Kevin
Expert Reply:
Hello Kevin. The # AKEBRK-7-SA brake assemblies will indeed work on your AL-KO 7210 axles. These axles use the standard 12" x 2" brake shoes and they bolt on to the standard 5 bolt brake flange. If you need new mounting hardware it will be part # BRKH12.
As far as the hub/drum, the # AKHD-865-7-2-EZ-K will likely be exactly what you will need. The 7K axles generally use standard sizing as well. I do suggest that you remove one of your hubs and unpack the bearings to confirm the sizing though, just because I am not exactly sure how old your axles are. The # AKHD-865-7-2-EZ-K hub uses a # 25580 (1.75" inner diameter) inner bearing and a # 14125A (1.25" inner diameter) outer bearing. Just confirm that your hub uses these same bearings and you will be good to go.
Product Page this Question was Asked From
etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 12 x 2 Inch Drum
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Continue Researching
- Search Results: viking wheel
- Search Results: black center cap
- Search Results: valve stems
- Search Results: gate latch
- Search Results: poly
- Shop: Aluminum Viking Series Valhalla Trailer Wheel - 16" x 6" - 8 on 6-1/2 - Black Spoke
- Shop: Aluminum Viking Series Valhalla Trailer Wheel - 16" x 6" - 6 on 5-1/2 - Black Spoke
- Search Results: trailer spindle washer
- Search Results: 2420801
- Shop: Easy Grease Trailer Hub and Drum Assembly for 5.2K - 7K Axles - 12" - 8 on 6.5 - Pre-Greased
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Shop: Brake Controller
- Shop: Aluminum AM03 Series Black Machined Trailer Wheel - 16" x 6" Rim - 8 on 6-1/2
- Shop: Trailer Hub and Drum Assembly - 7,000-lb Axles - 12" Diameter - 8 on 6-1/2 - Pre-Greased
- Shop: Mounting Bolts and Hardware for 12" Single Brake Assembly
- Q&A: Wheel Center Cap for Aluminum Liger Trailer Wheel
- Q&A: Correct 1/2 Wheel Stud for Dexter 7K Axle
- Q&A: What Valve Stem For Aluminum AM03 Series Black Machined Trailer Wheel AM43NR
- Video: Feature Review Aluminum AM03 Series Black Machined Trailer Wheel
- Shop: Trailer Hitch
- Video: Let’s Check Out the Easy Grease Trailer Hub and Drum Assembly for 5.2K
- Shop: Trailer Wiring
- Shop: Front Mount Hitch
- Q&A: Replacement Hubs And Electric Brakes For Dexter axle 8-133
- Q&A: 1994 Four Star Horse Trailer Replacement Locking Latch
- Video: EcoHitch Class III Hidden Trailer Hitch DIY Installation - 2025 Kia Carnival Hybrid
- Q&A: Can B and W Gooseneck Hitch Ball # BWGNXA2061 be Used with Andersen Ranch Hitch
- Q&A: Replacement Oil Seal for AL-KO 568303
- Video: Install: EcoHitch Hidden Front Mount Trailer Hitch Receiver on a 2011 Ford F-350 Super Duty
- Shop: Camper Tie-Downs


