Is it Okay for Inner Race to Spin Inside Hub or Should it Remain Still
Updated 05/06/2024 | Published 05/04/2024
Question:
Is it a problem if the inner raceway spins in the hub? Is a new hub required if the race is not seating correctly? I have a camper with Lippert 3400 axles. Found this issue on one wheel while changing the brake assemblies and repacking the bearings.
asked by: David S
Expert Reply:
Hey David, thanks for reaching out!
What you described is definitely no bueno. The race is supposed to fit really snug in the hub assembly and then that's what makes contact with the bearings. You can technically spin the race inside the hub but it would be difficult to do - it wouldn't/shouldn't be spinning freely.
If you let me know what numbers you find on your bearings and races I can let you know what part you need. Since your Lippert axles are rated for 3,400 lbs it's in the middle range of what parts could work.
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - 25580
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.75 Inch I.D.
- Bearing 25580
- Race 25520
- 10000 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 8000 lbs Axle
- 9000 lbs Axle
- etrailer
more information >
Continue Researching
- Video: Offset Trailer Spare Tire Mount by Dutton-Lainson: The Breakdown
- Search Results: castle nut
- Search Results: spare tire mount
- Search Results: lug nuts
- Search Results: spare tire bracket
- Article: Most Popular Wheel Bearings
- Shop: Tie Down Spare Tire Mount for Aluminum Trailers - 4 and 5 Lug Wheels - Galvanized Steel
- Shop: Tie Down Side-Mount Spare Tire Mount - 4 and 5 Lug Wheels - Zinc Plated Steel
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - Galvanized
- Video: etrailer VS Dexter Self Adjusting Brakes Comparison
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Shop: etrailer Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 5,200 lbs to 7,000 lbs
- Shop: Tie Down Marine-Grade Carpeting for Bunk Boards - Gray - 12' Long x 11" Wide
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Why Would a Wheel Bearing Race Spin In the Hub
- Q&A: Need 8-Lug Brake Drum For 2005 Keystone Montana
- Search Results: 22333tbn seal
- Search Results: static/images/styles/checksvg
- Video: Breaking Down the Easy Grease Trailer Hub and Drum for 5.2K to 7K Axles
- Search Results: hubs
- Q&A: Should You Completely Cover Wood on Bunk Boards with Marine-Grade Carpeting or Leave Wood Exposed
- Video: Grease Seals 10-36 (pair) Feature Review
- Shop: Fifth Wheel Hitch
- Q&A: Should You Replace the Grease Seals When Repacking Bearings
- Q&A: When Do Brakes Need to be Added to Both Axles of Tandem Axle Trailer
- Q&A: Assembly Order for Bearings, Races, and Seals for Trailer Hub # 34822BX
- Q&A: Cannot Fit Washer Between Castle Nut and Outer Wheel Bearing
- Video: Let’s Check Out the Replacement Trailer Hub Bearing
- Video: The Low-Down on the Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles