Does MaxxFan Dome Roof Vent w/ 12V Fan # MA00-03812B Have Brushless Motor

Question

Question:

Sir, I recently bought from you MaxxFan Dome. A quick question: is its motor brushless? Or is it brushed? Thank you!

asked by: Eugene S

0

Expert Reply:

The MaxxFan Dome Roof Vent w/ 12V Fan # MA00-03812B does not have a brushless motor.

expert reply by: Jameson C

0

Answer 1

Thanks for reaching out Amie, You don’t need 12-volt power to actually run the unit for heating or cooling. The Chill Cube runs off standard 120-volt power, so as long as you’re plugged into shore power or running a generator, you’ll be all set. The…

view full answer...

Answer 2

Hey Joseph, the Ventline Vanair Trailer Roof Vent w/ 12V Fan #VP-543SP that you referenced was not designed for installing on the sidewall of a trailer so we can't guarantee it wouldn't let water in if it was raining... BUT the Sherpa…

view full answer...

Answer 3

Hello Randy, Yes, we have a couple of different options for a wall mounted exhaust. - MaxxFan Dome Plus Roof Vent w/ 12V Fan - LED Light - 6" Diameter - Manual Lift - Black #MA00-03810B (this one has a nice LED light). - Ventline Vanair Trailer…

view full answer...

Answer 4

Linda, on the DC side, PowerMax power centers like the 45A #PM47VR, 55A #PM67VR, and 60A #PM77VR use standard automotive-style blade fuses, which are widely available and often reused from your existing setup, assuming fuses aren't blown. On the…

view full answer...

Answer 5

I see where you're coming from in regards to how aggressive (or lack thereof) the GFCI Outlet Cover #37205-12215 closes. To put your mind at ease I recommend going all out and using the Valterra Locking Electrical Cable Hatch #A10-2150BKVP…

view full answer...

Answer 6

Hey Paul, I drew up a little diagram of the GFCI Outlet Cover #37205-12215 dimensions. If you need anything else just let me know and I'd be happy to help.

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 12

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Does MaxxFan Dome Roof Vent w/ 12V Fan # MA00-03812B Have Brushless Motor

Product Page this Question was Asked From

Continue Researching