Width at Bottom of TorkLift PowerArmor Locking Battery Box TLA7700L

Question

Question:

It states that the box is over 10 inches wide, I assume that’s the width of the top. How wide is the outside bottom that would be resting where my current trailer battery box is.

asked by: Jim

0

Expert Reply:

You are correct that the 10 inch measurement is at the top with the lid on; the width at the bottom is 7-3/4 inches for the TorkLift PowerArmor Locking Battery Box - 6V and 12V Lithium Batteries # TLA7700L.

expert reply by: Kyle S

0

Answer 1

I reached out to my contact at TorkLift regarding the PowerArmor Locking Battery Box #TLA7700L and he said that the only thing that really differentiates this from other boxes with regards to Lithium battery compatibility is its physical size.…

view full answer...

Answer 2

The outside dimensions of the TorkLift PowerArmor Locking Battery Box, #TLA7700L being 32L x 10.5W x 12.25D it appears that yes they will, per the battery dimension you specify. With 10.2" in height on the battery I would certainly isolate the…

view full answer...

Answer 3

I have a box that will fit your batteries but the TorkLift PowerArmor Locking Battery Box #TLA7700L has the overall dimension to fit your batteries but the problem arises on the construction of the inside and the length of your batteries. The…

view full answer...

Answer 4

So the internal dimensions of the Torklift box part #TLA7700L that you referenced are 11-3/4 inches deep which is another way of saying tall. So since your battery is 11.02 inches tall this would easily be compatible. Since your width is 7.28 inches…

view full answer...

Answer 5

What are the other dimensions of the battery?

view full answer...

Answer 6

For a battery box it is going to depend on the dimensions of your group 27, 12-volt batteries. Based on some of the batteries I looked up we have a couple of boxes you could use. First is TorkLift PowerArmor Locking Battery Box #TLA7708R. Attractive,…

view full answer...

Answer 7

Yes, the TorkLift PowerArmor Locking Battery Box #TLA7700L will comfortably fit your 2 Renogy batteries in it since each battery measures 13.1" Wide x 6.9" Deep x 8.6" High.

view full answer...

Answer 8

Great question, lets have a look at this unit and see what we can figure out. **Commercial Grade Battery Box for Group 8D Batteries - Vented #329-HM484. *TorkLift PowerArmor Locking Battery Box - 6V and 12V Lithium Batteries - Powder Coated Aluminum…

view full answer...

Answer 9

The holes on the bottom of the TorkLift PowerArmor Locking Battery Box #TLA7700L aren't necessarily designed for mounting the box and are really there to allow moisture to escape and as access holes for wiring. According to the instructions there…

view full answer...

Answer 10

Hi Mike; the exterior width of 10-1/2 inches includes the lid for the TorkLift PowerArmor Locking Battery Box - 6V and 12V Lithium Batteries #TLA7700L. It is 7-5/8 inches not including the lid.

view full answer...

Answer 11

The TorkLift PowerArmor Locking Battery Box - 6V and 12V Lithium Batteries #TLA7700L weighs approximately 30lbs.

view full answer...

Answer 12

The TorkLift PowerArmor Locking Battery Box - 6V and 12V Lithium Batteries - Powder Coated Aluminum #TLA7700L will have an internal dimension of 31-1/2" long x 10" wide x 11-3/4" tall. As long as 2 of the Battle Born batteries you are…

view full answer...

Width at Bottom of TorkLift PowerArmor Locking Battery Box TLA7700L

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching