Will 2 Renogy Batteries Fit Inside the TorkLift PowerArmor Locking Battery Box

Question

Question:

Im purchasing 2 Renogy 100AH batteries and Im looking at this TorkLift PowerArmor Locking Battery Box - 6V and 12V Lithium Batteries - Powder Coated Aluminum Item # TLA7700L. Could you let me know if they will be a fit for these two batteries? It looks like they will because the specs show 13.1×6.9×8.6 I believe but they dont note which is length width and height.

asked by: Chase W

0

Expert Reply:

Yes, the TorkLift PowerArmor Locking Battery Box # TLA7700L will comfortably fit your 2 Renogy batteries in it since each battery measures 13.1" Wide x 6.9" Deep x 8.6" High.

expert reply by: Jon G

0

Gary

9/27/2025

Hey Jon G, another question for you. I have 2 Li Time batteries. They are 15.12" long, 7.64" wide and 9.76" tall. Will this work for my use? Is there something else that may? Even if it needs to be 2 separate boxes?

Jon G.

9/30/2025

@Gary The middle bar in that Box # TLA7700L won't accommodate your bigger batteries so we'll need to get you a different setup. The only box I'm seeing that works with your battery size is the TorkLift PowerArmor Locking Battery Box # TLA7708R. It will be a little longer than your battery (at 26-1/2") but none of the other ones will be long enough to work with your batteries.

Answer 1

Happy to help James, There are several ways to mount the TorkLift PowerArmor Locking Battery Box #TLA7700L depending on your trailer. The box does not use a specific bolt pattern in the bottom. Instead, it is designed to be mounted a few different…

view full answer...

Answer 2

Hey Eddie! Yes, Group 31 batteries can fit in the TorkLift PowerArmor Locking Battery Box #TLA7700L. Your typical Group 31 battery measures 13" long x 6.8" wide x 9.4" high. The internal dimensions of the battery box are 31" long…

view full answer...

Answer 3

The outside dimensions of the TorkLift PowerArmor Locking Battery Box, #TLA7700L being 32L x 10.5W x 12.25D it appears that yes they will, per the battery dimension you specify. With 10.2" in height on the battery I would certainly isolate the…

view full answer...

Answer 4

I reached out to my contact at TorkLift regarding the PowerArmor Locking Battery Box #TLA7700L and he said that the only thing that really differentiates this from other boxes with regards to Lithium battery compatibility is its physical size.…

view full answer...

Answer 5

The holes on the bottom of the TorkLift PowerArmor Locking Battery Box #TLA7700L aren't necessarily designed for mounting the box and are really there to allow moisture to escape and as access holes for wiring. According to the instructions there…

view full answer...

Answer 6

To install the TorkLift PowerArmor Locking Battery Box #TLA7700L you'll need to use the included self-tapping screws to mount the box to your trailer tongue. You can do this either directly to your frame, using the extension brackets if they are…

view full answer...

Answer 7

The Torklift Battery Mounting Box part #TLA7708R or #TLA7700L that you referenced can mount to the brackets you have on your trailer as there are several holes on the bottom of the box that you can use to run bolts through to then attach to your…

view full answer...

Answer 8

Hey Brian. How wide exactly are you batteries? The TorkLift PowerArmor Locking Battery Box item #TLA7700L has internal dimensions of 31" long x 7-5/8" wide x 12-7/8" deep. I am curious what you mean but just under 8" wide. I do…

view full answer...

Answer 9

The TorkLift PowerArmor Solar Locking Battery Box part #TLA7700LS is not wide enough to fit two group 31 batteries. Group 31 batteries are 13" long by 6.72" wide by 9.44" tall. The only option that's big enough is the Commercial…

view full answer...

Answer 10

I do have a possible solution for you but unfortunately there aren't any battery boxes available that will hold two 12V batteries and fit within a 21" length and 8" width. The closest thing we have is the TorkLift PowerArmor Locking…

view full answer...

Answer 11

Since you will be towing a travel trailer I recommend using a Equal-i-zer Weight Distribution System #EQ37060ET with the Winnebago Minnie. The weight distribution system will allow you to adjust for different hitch heights with the adjustable head…

view full answer...

Answer 12

The RC Manufacturing T-Series Trailer Tongue Toolbox - A-Frame - Steel #313-TM362016M is just the steel box. Most people drill into the bottom of the box to hold the box to the trailer frame with self-tapping screws like #WLS100. You can weld it if…

view full answer...

Will 2 Renogy Batteries Fit Inside the TorkLift PowerArmor Locking Battery Box

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching