Does the Manual Switch Kit for Pace Edwards Tonneau Cover Require Pushing and Holding

Question

Question:

Hi, can you tell me if the pace Edwards manual switch works with a “press and release” to open or close completely or if it is required to hold the button to keep the topper moving?

asked by: Amanda

0

Expert Reply:

The # 311-BL-1120 is a manual switch. To operate the switch you will have to press and hold it. Releasing it will stop the movement of the cover and it will return to the neutral position. There is no option to press and release for the cover to fully open on close.

expert reply by: Robin H

0

Answer 1

The manual switch for the Pace Edwards Bedlocker Retractable Hard Tonneau Cover #PE44CV can be found as part #311-BL-1120 on our site. This plugs into the harness at the canister and then you route and install the switch wherever it works best for…

view full answer...

Answer 2

Hey Jesse, thanks for reaching out! I'm not finding an installation guide anywhere for the Manual Switch Kit #311-BL-1120, but thankfully it's fairly straightforward. You just plug the wiring harness in and then attach the butt connectors to…

view full answer...

Answer 3

For a Pace Edwards Bedlocker tonneau cover you would need the Replacement Remote for Pace Edwards Bedlocker Retractable Hard Tonneau Cover #PE33QJ. Pace Edwards also has the Manual Switch Kit for Pace Edwards BedLocker or UltraGroove Electric Tonneau…

view full answer...

Answer 4

To replace the rocker switch on your Pace Edwards Bedlocker Tonneau cover you'll need the Manual Switch Kit for Pace Edwards BedLocker #311-BL-1120.

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 8

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Does the Manual Switch Kit for Pace Edwards Tonneau Cover Require Pushing and Holding

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching