Manual Switch Kit for Pace Edwards Bedlocker Retractable Hard Tonneau Cover

Question

Question:

What is the part for the manual switch?

asked by: Betty

0

Expert Reply:

The manual switch for the Pace Edwards Bedlocker Retractable Hard Tonneau Cover # PE44CV can be found as part # 311-BL-1120 on our site.

This plugs into the harness at the canister and then you route and install the switch wherever it works best for your situation.

expert reply by: Jon G

0

Answer 1

Hey Jesse, thanks for reaching out! I'm not finding an installation guide anywhere for the Manual Switch Kit #311-BL-1120, but thankfully it's fairly straightforward. You just plug the wiring harness in and then attach the butt connectors to…

view full answer...

Answer 2

For a Pace Edwards Bedlocker tonneau cover you would need the Replacement Remote for Pace Edwards Bedlocker Retractable Hard Tonneau Cover #PE33QJ. Pace Edwards also has the Manual Switch Kit for Pace Edwards BedLocker or UltraGroove Electric Tonneau…

view full answer...

Answer 3

I have a couple options for you as Pace Edwards no longer makes the remote for your BLT 163 retractable tonneau cover. First the Manual Switch Kit #311-BL-1120 can be added allowing you to open and close the tonneau with the power switch. The switch…

view full answer...

Answer 4

The #311-BL-1120 is a manual switch. To operate the switch you will have to press and hold it. Releasing it will stop the movement of the cover and it will return to the neutral position. There is no option to press and release for the cover to fully…

view full answer...

Answer 5

To replace the rocker switch on your Pace Edwards Bedlocker Tonneau cover you'll need the Manual Switch Kit for Pace Edwards BedLocker #311-BL-1120.

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Manual Switch Kit for Pace Edwards Bedlocker Retractable Hard Tonneau Cover

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching