Replacement Grease Seals For A 6K Lippert Axle # 22333

Question

Question:

Do you have these seals for a 6,000 lbs axle 2.25” #22333 It’s a Lippert axle

asked by: Wayne B

0

Expert Reply:

To replace the grease seals on your 6K Lippert axle you can use the Grease Seals 10-36 (pair) # RG06-070. These seals have a 2.25" inner diameter and 3.376" outer diameter for use with a # 42 Spindle.

expert reply by: Kevin C

0

Answer 1

With a 2022 F350 short bed, hitting the top of the bed rails should not be an issue with most campers. Turning clearance however, will certainly be a factor. That is one advantage of the Andersen Ultimate hitch #AM3200, as it provides a 9"…

view full answer...

Answer 2

Hey Flavio, thanks for reaching out! Yes, the Curt CrossWing #C86JR and the Curt E16 #C16115 mount to the same rails so they are interchangeable. With that being said, the E16 is the most basic 5th wheel hitch on the market and does not provide a…

view full answer...

Answer 3

The Curt CrossWing Lightweight 5th Wheel Trailer Hitch item #C86JR weighs only 60 lbs. This is the one that mounts to industry standard 5th wheel rails. I have linked a review video below so you can see the functions of this hitch demonstrated.

view full answer...

Answer 4

Yes, the Curt CrossWing Lightweight 5th Wheel Trailer Hitch - 20K #C86JR can be used with the Curt Rota-Flex 5th Wheel Pin Box #LC328329. If you look at Curt's website there's reviews from customers who say they use the two together, with one…

view full answer...

Answer 5

I reached out to my contact at Andersen and he did say that the red funnel piece on your Ultimate Connection 5th Wheel Hitch #AM3200 is strictly for guidance purpose to ease the hookup process. It has no effect whatsoever as to the actual connection…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Replacement Grease Seals For A 6K Lippert Axle # 22333

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching