What Size Nut Does The Replacement Top Roller for Ark Ezi-Guides Boat Trailer Roller Guide-Ons Use?

Question

Question:

What size nut do I use to secure this. Both of them came off when I retrieved my boat I found only one. So have to order a new one but the nuts are missing.

asked by: Marvin J

0

Expert Reply:

According to ARK, the Replacement Top Roller for Ark Ezi-Guides Self-Aligning Boat Trailer Roller Guide-Ons # ARK24FR will use a 19mm nut.

Additionally, this is a replacement part for the Ark Ezi-Guides Self-Aligning Boat Trailer Loading System # AR64FR, # AR74FR, and # AR84FR.

expert reply by: Bryce D

0

Answer 1

As you can see in the provided photo, the rollers featured on the #AR84FR Ezi-Guide is indeed spring loaded. Once the boat hull rolls over them, they'll move to accommodate the shape of the hull. I've linked you to a product description video…

view full answer...

Answer 2

Maybe! I am going to try to go another direction because It sounds like you've looked over our selection of side guides already and haven't been impressed with their durability. As far as heavy duty goes, our strongest galvanized guides are…

view full answer...

Answer 3

I do have a photo of the Ark Ezi-Guides Self-Aligning Boat Trailer Loading System part #AR84FR installed which you can see below. This should give you a better idea of what is involved but it's not complicated at all. These work really well and…

view full answer...

Answer 4

Hello Dan, I went out to the warehouse to get the measurement you requested. The diagonal measurement of the #AR84FR is right at 5 1/2". What kind of trailer are you looking to mount these to?

view full answer...

Answer 5

The keel roller will help to center your boat as the wobble rollers you have allow the boat to sit slightly to one side or the other. We do offer the CE Smith Keel Roller #CE29505 which has a self centering design to help guide your boat to the…

view full answer...

Answer 6

The CE Smith Post-Style Guide-Ons #CE27760 will only fit up to a 3" wide x 4-1/4" tall frame with the included hardware or a 3" wide x 5-1/4" tall frame with their Extended U-Bolt Kit #CE11416. A better option you might consider…

view full answer...

Answer 7

The Ark Ezi-Guides Self-Aligning Boat Trailer Loading System part #AR64FR has rollers which measure 14" long. I have attached a photo below with this measurement. Unfortunately this system will not work on a angled back section, it requires a…

view full answer...

Answer 8

Just the springs of the Ark Ezi-Guides are not available, and so if the 16-20' version is too stiff for your boat your best bet is selling it and purchasing the #AR64FR designed for 14' to 16' power boats. This is the lightest option,…

view full answer...

Answer 9

Yes! We have three different models of their self-aligning guides: - Ark Ezi-Guides Self-Aligning Boat Trailer Loading System - 20' to 28' Long Power Boat #AR84FR - Ark Ezi-Guides Self-Aligning Boat Trailer Loading System - 16' to 20'…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 12

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

What Size Nut Does The Replacement Top Roller for Ark Ezi-Guides Boat Trailer Roller Guide-Ons Use?

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching