Install Photo of Ark Ezi-Guides Self-Aligning Boat Trailer Loading System

Question

Question:

Can you send pictures of arc trailer guides installed on a few different trailers so i can understand the installation better before I purchase? Thanks,

asked by: David S

0

Expert Reply:

I do have a photo of the Ark Ezi-Guides Self-Aligning Boat Trailer Loading System part # AR84FR installed which you can see below. This should give you a better idea of what is involved but it's not complicated at all. These work really well and I'm sure you will be happy with them.

expert reply by: Conner L

0

click to enlarge

Answer 1

As you can see in the provided photo, the rollers featured on the #AR84FR Ezi-Guide is indeed spring loaded. Once the boat hull rolls over them, they'll move to accommodate the shape of the hull. I've linked you to a product description video…

view full answer...

Answer 2

Hello Dan, I went out to the warehouse to get the measurement you requested. The diagonal measurement of the #AR84FR is right at 5 1/2". What kind of trailer are you looking to mount these to?

view full answer...

Answer 3

The keel roller will help to center your boat as the wobble rollers you have allow the boat to sit slightly to one side or the other. We do offer the CE Smith Keel Roller #CE29505 which has a self centering design to help guide your boat to the…

view full answer...

Answer 4

The CE Smith Post-Style Guide-Ons #CE27760 will only fit up to a 3" wide x 4-1/4" tall frame with the included hardware or a 3" wide x 5-1/4" tall frame with their Extended U-Bolt Kit #CE11416. A better option you might consider…

view full answer...

Answer 5

Maybe! I am going to try to go another direction because It sounds like you've looked over our selection of side guides already and haven't been impressed with their durability. As far as heavy duty goes, our strongest galvanized guides are…

view full answer...

Answer 6

According to ARK, the Replacement Top Roller for Ark Ezi-Guides Self-Aligning Boat Trailer Roller Guide-Ons #ARK24FR will use a 19mm nut. Additionally, this is a replacement part for the Ark Ezi-Guides Self-Aligning Boat Trailer Loading System…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 9

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 10

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 11

The Demco Hydraulic Trailer Brake Actuator part #DM72VR should be a direct replacement for the Atwood 61101 Brake Actuator that you have now. This newest updated it rated at 7K instead of 6K. This is a bolt on option that mounts on 3" centers.…

view full answer...

Answer 12

Hey Kris, the Dutton Lainson winch part #DL15440 does not come with a strap so you will need to order one with it. The part #DL24250 will work great with this winch as it is correct width, is 25 feet in length, and has a capacity of 3,700 lb WLL and…

view full answer...

Install Photo of Ark Ezi-Guides Self-Aligning Boat Trailer Loading System

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching