What is the Thickness Of The Alpha Systems Superflex TPO RV Roof Membrane?

Question

Question:

What is the thickness of the Alpha Systems TPO membrane? Thank you

asked by: Paul

0

Expert Reply:

The Alpha Systems Superflex TPO RV Roof Membrane # AL25CV is 0.030" thick. This is the only thickness they offer currently for the TPO. You will need the Alpha Systems RV Roof Replacement Installation Kit # AL63FJ to install this roof membrane.

expert reply by: Bud M

0

Jay D.

5/31/2024

You indicate thickness is 0.30”. That’s almost a third of an inch thick. Did you actually mean 0.030” thick?

Bud M.

6/1/2024

@JayD Sorry for the typo. Yes, the roof membrane is 0.030" thick.

Answer 1

The 3' x 2' Alpha Systems Patch Kit for SuperFlex RV Roof Membranes - White #AL37CV is not self-adhesive. It does come with self-leveling adhesive that you'd use, however.

view full answer...

Answer 2

Hello Andrew, Well that sounds like quite the fun trip, what state or states will you be traveling through? You're asking a really important question, especially since you're planning a cross-country trip with about 250 pounds of bikes and…

view full answer...

Answer 3

Yes, you can use the ZIP System Green Roof Sheathing as an underlayment for the Alpha Systems Superflex TPO RV Roof Membrane #AL25CV. Don't forget to also pick up the Alpha Systems RV Roof Replacement Installation Kit #AL63FJ as well since it…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 9

You can use the RV Propane Gas Detector #RS64FR (white) or #RS44FR (black) to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

What is the Thickness Of The Alpha Systems Superflex TPO RV Roof Membrane?

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching