Trailer Hitch Recommendation for a 2022 Lexus RX 350 F Sport

Question

Question:

Looking for a hitch for my 2022 Lexus RX350 F Sport. Please let me know what to purchase. Thanks.

asked by: Paula B

0

Expert Reply:

I recommend using the Draw-Tite Max-Frame Trailer Hitch Receiver # 75540 for your 2022 Lexus RX 350 F Sport. It's the only hitch we have to fit that model but it features a hidden crosstube which gives it a sleek look and reduces ground clearance.

Attached is an installation video we shot on the 2021 model. Please note that starting in 2020 the rear fascia is a little lower than previous models so the receiver may push against it for the install.

If the plan was to use this for a bike rack I highly recommend checking out the Kuat Transfer V2 # KU84FR because it looks sleek and is easy to load/unload your bikes on due to the unique U-Shaped frame. Attached is a review video for you to check out.

expert reply by: Jon G

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

We have hitches that were specifically tested to fit the F-Sport models of the 2021 Lexus RX 350 like with the totally hidden Hidden Hitch part #DT58GR which has detachable lower hitch opening or the Draw Tite #75540 which only has the lower hitch…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 6

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 7

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Trailer Hitch Recommendation for a 2022 Lexus RX 350 F Sport

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching