Replacement for 5,100 Pound 86-1/2 Inch Long Overslung Dexter Axle

Updated 07/18/2022 | Published 07/13/2022

Products Featured in This Question

Trailer Axle w/ Electric Brakes - Easy Grease - 6 on 5-1/2 Bolt Pattern - 89" Long - 6,000 lbs

(225)

$583.88

Trailer Axle Beam with Easy Grease Spindles - 86-1/2" Long - 6,000 lbs

(246)

$237.27

Trailer Axle w/ Electric Brakes - Easy Grease - 6 on 5-1/2 - 86-1/2" Long - 6,000 lbs

(225)

$547.09

Dexter Trailer Springs Over-Under Conversion Kit

(779)

$88.64

Spring Seat for Typical 5,200-lb to 7,200-lb, Round Trailer Axles with 3" Diameter

(634)

$10.38

Question:

Accord to my Manufacture the axle needed is: Dexter 0280219 Axle 5100# Overslung HF=86.51 SC=68.50 6 Hole 1/2 Stud 12 Brake I cant found same specification on the web site, the close its Item # e65SR but the SC isnt the same and doesnt said anything about Overslung. Can you guys Help me?

asked by: Guillermo F

Expert Reply:

When choosing a replacement axle you want one that is the same length. Since you have a hub face measurement of 86.51" a better choice would be an 86-1/2" axle. The # e65SR is an 89" axle so it is several inches longer. Also, you don't need a 6k axle, a 5,200 lb axle is fine. You can use a 6k axle but you need to keep in mind that this will not increase the capacity of your trailer.

For an axle that is equivalent to the # e65SR I recommend the # e73SR, or if you just need the axle itself the # e33GR. This axle has the same length as your current axle. The spring center is different but that is a fairly common occurrence. What you will have to do is cut off the spring seats and weld on # TRSS300 to match your 68-1/2" measurement.

Then, to convert this into an overslung axle, you will need the Dexter Trailer Springs Over-Under Conversion Kit # K71-385-00. This kit will allow you to flip the axle so the leaf springs are on top once it is installed.