Front Mount Hitch For A 2022 Toyota 4Runner SR5

Question

Question:

What front mount hitch will fit my 2022 Toyota 4Runner SR5?

asked by: Howard

0

Expert Reply:

We have the perfect front mount trailer hitch that is confirmed for your 2022 Toyota 4Runner SR5!

The Draw-Tite Front Mount Trailer Hitch Receiver # 65074 has an easy, bolt-on installation with no welding required. The hitch has a black powder coated finish that covers an e-coated base that offers a superior rust protection.

The hitch has a line pull of 9,000 pounds and has a vertical load of 500 pounds. I would recommend checking your vehicle's manual to find out the proper towing capacities for your vehicle.

expert reply by: Noah E

0

Answer 1

Hey Kevin! Yes, the Curt Front Mount Trailer Hitch #C31076 will fit your 2024 Toyota 4Runner TRD Pro. Check out the attached picture where another customer installed the hitch on their 2022 TRD Pro. If you need anything else don't hesitate to…

view full answer...

Answer 2

Hey Michael! We are still carrying Draw-Tite hitches. However, their parent company had some legal problems and went bankrupt so the brand is for sale right now. Most of their products are currently out of stock, so you won't find them on our…

view full answer...

Answer 3

Hey Doug, Your 2023 Toyota 4Runner SR5 is 100% compatible with the Curt Front Mount Trailer Hitch Receiver #C31076. The #C31076 does not require drilling, and can handle being pulled out in an off-road situation.

view full answer...

Answer 4

Hey Bob, I am happy to look into this for you. You are installing this front hitch on a 2018 Toyota 4Runner, correct? When you say "not quite" about how much would you say it is off by? If we are talking about a fraction of an inch, it is…

view full answer...

Answer 5

I attached a link to this page (down below the product links), that has the instructions for the Curt Front Hitch part #C31076 that you referenced. This is a confirmed fit for your 2017 Toyota 4Runner TRD so it would be a great fit.

view full answer...

Answer 6

Yes, the conical tooth washer needs to be positioned so that the teeth face the hitch. That is what prevents it from coming loose. Take a look at the video I have linked. At about the 1:50 mark the installers start to put the hardware on to mount the…

view full answer...

Answer 7

Hello Joe. Yes, the Curt Front Mount Trailer Hitch #C31076 will be a good fit for your 2023 Toyota 4Runner Premium. For a winch mount, take a look at the Bulldog Winch Hitch Mounted Winch Mounting Plate #BDW20011. This will mount directly into the…

view full answer...

Answer 8

Sounds like the threads of the weld nut are rusty/dirty. Best option is to get a thread tap in size M12 X 1.25 to clean the threads out so the bolt can thread in. This is a very common issue on vehicles that have seen a few winters typically.

view full answer...

Answer 9

Hello Marc, thanks for reaching out. The Curt Front Mount Trailer Hitch Receiver #C31076 is the correct fit for the 2024 Toyota 4Runner Limited AWD. I double checked with Curt and they confirmed the hitch to fit all models of the 2024 4Runner, so…

view full answer...

Answer 10

It's not uncommon for hitches to get bent in shipping which makes the mounting holes not line up as easily as they should. So if the holes are off only by a little bit what you can do is start all of the bolts loose and then torque them down and…

view full answer...

Answer 11

Though the Curt # C13409 and Draw-Tite #76271 are nearly identical to each other, there are a few subtle differences. First being where they sit once installed. The will both have the exact same height of 14-1/2 inches, but the Draw-Tite #76271 will…

view full answer...

Answer 12

The Curt front hitch part number C31076 comes with bolts that are M10-1.25 x 35 mm and M12-1.25-35 mm.

view full answer...

Front Mount Hitch For A 2022 Toyota 4Runner SR5

Continue Researching