We'll connect you with nearby partnered installers who know this exact setup.

CURT

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

Part Number: 13086

89 Reviews | 18 Questions

In Stock

$457.46

Not Confirmed to Fit

2018 Subaru Forester

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Add to cart

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

CURT 6000 lbs WD GTW Trailer Hitch - 13086

13086 - Visible Cross Tube CURT For Towing

Show All (7) Product Images

Show Fewer Product Images

Customer Photos

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" customer photo

Show All (17) Customer Images

Show Fewer Customer Images

We'll connect you with nearby partnered installers who know this exact setup.

SCHEDULE AN INSTALLATION

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant. Great Prices for the best trailer hitch from CURT. Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" part number 13086 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.

All Info
Reviews (89)
Q & A (0)
Related Parts
Photos

CURT Trailer Hitch - 13086

Highlights

Custom Fit for Your Vehicle: Mounts to existing attachment points
Handles up to 5,000 lbs (GTW): Great for towing small campers, boats, or utility trailers
Supports up to 500 lbs (TW): Works with bike racks, cargo carriers, and Class III gear
Bolt-On Installation: Mounts directly to the frame with included hardware—no welding needed
Durable Steel Build: Fully welded, square-tube design adds strength and stability for towing
Corrosion-Resistant Finish: Gloss black powder coat over a protective base resists rust

Features to know about

Haul Gear and Bikes with Confidence: Class III Strength and 2" Receiver

This hitch is built for everyday towing and hauling. With a 5,000 lbs maximum gross trailer weight and 500 lbs of tongue weight (6,000 lbs GTW and 600 lbs TW when used with weight distribution), it handles small campers, boats, or loaded cargo carriers without worry. The 2" x 2" receiver opening works with most ball mounts, bike racks, and platforms, so you can easily swap between hauling gear and transporting bikes.

Built to Last: Fully Welded Steel with Corrosion-Resistant Finish

The square-tube steel construction is fully welded for solid strength. A gloss black powder coat finish over a protective base coat helps fight rust and wear from road grime or weather. Whether you’re towing at the lake or hitting backroads with a cargo rack, the sturdy build and corrosion resistance mean this hitch keeps up season after season.

Simple Bolt-On Install: No Welding Required

This custom-fit hitch bolts directly to the frame for a secure fit and proper alignment. It comes with a complete hardware kit and installation instructions so you can confidently install it at home using basic tools. There’s no welding needed, just straightforward mounting that lines up where it should.

Ready for Everyday Use: Practical Design for Towing and Accessories

The visible cross tube design offers easy access to the receiver for quick hookups. Pair it with your favorite ball mount, pin, and clip (sold separately) to tow or mount racks as needed. Rated as a Class III hitch and backed by precision robotic welding, it’s made for reliable performance on all your towing tasks.

Specs

Receiver Dimensions

Receiver opening: 2" x 2"

Class Rating

Rating: Class III

Weight and Capacity

Maximum gross trailer weight: 5,000 lbs
Maximum GTW when used with weight distribution: 6,000 lbs
Maximum tongue weight: 500 lbs
Maximum TW when used with weight distribution: 600 lbs

Warranty

Warranty: Limited lifetime warranty

13086 Curt Class 3 Trailer Hitch Receiver

Installation Details 13086 Installation instructions

This Product Fits The Following Vehicles

1984 - 1995 Toyota Pickup

Customer Satisfaction Score:

96% were satisfied with this product

4% of customers were not satisfied

Arrived Damaged
Product did not meet expectations
Wrong item was ordered

4% of customers were not satisfied

Arrived Damaged
Product did not meet expectations
Wrong item was ordered

4.8

89 reviews

5 Stars		(73)
4 Stars		(15)
3 Stars		(0)
2 Stars		(1)
1 Star		(0)

by: Bill 04/20/2026

Fit perfectly. 84 Toyota Pickup. Fit right under rear exhaust hangar, which some on the magical inter-web say needs modification. Did not have a bumper, but still a bit longer than 60 minutes installation (Curt's claim).
Highly recommended; may not fit 83's and previous HiLuxes.

by: Dan P 05/07/2022

1993 Toyota Pickup

The Curt Trailer Hitch Receiver I ordered arrived quickly and in good shape. The box it was in was pretty much destroyed but nothing was missing, so no complaints. The install went by the numbers and looks great. Really love doing business with etrailer, they are on it! I, also, appreciate their installation videos, they have helped me immensely!

Click to Enlarge

by: Jay Dub 08/08/2017

1992 Toyota Pickup

1992 Toyota pickup:
As far as etrailer goes I was impressed. I ordered on a Wednesday at 4:30 pm. When I got home from work Friday (48 hours later) it was on my front porch. Now that's fast shipping!
The hitch was a good fit for 1992 Toyota pickup. The exhaust hanger was a slight problem as other reviews have mentioned. No drilling was required, I just had to grind the clearance notch for the hanger put in by the manufacturer about 1/2 inch deeper. The notch was there just not deep enough. Other than that it was a perfect fit. Installation took about 2 hours. Looks good with the chrome bumper.
I uploaded a picture of the notch.

Click to Enlarge

by: msteward 10/01/2016

This hitch was a lot heavier than I thought it would be to start off with.

The package was delivered on time with no damage to it, even for it's weight.

I always like to open everything to make sure everything I ordered was there and it was. Then start opening up the hitch box and makes sure all the parts are there, and they where.

It was a fairly easy install for one person to do. Depending on your bumper set up, and Toyota has a couple different styles, you may have to do some fabrication style work but nothing hard and no real special tools.

I did take some photos of what I had to do to mine. My bumper mounts to the inside of my frame so I did have to notch out a spot in them to clear the stove bolt head. That was no big thing to do.

Other than that this thing fit like a glove and it cleared my exhaust hanger perfectly. The ball came already mounted but after I got my trailer hooked up and though about my load I decided I wanted to flip it over for the 3/4 rise instead, again no big job to change.

Customer service is some of the best, double checking what I was putting it on and finding some other things I needed that I did not see on the website or just wasn't looking in the right spot or just plain over looked it, probably the later.

Thanks again etrailer.com., another very satisfied repeat customer!

Click to Enlarge

by: Winfield 06/23/2020

1991 Toyota Pickup

Item arrived pretty quickly and in good condition. I installed this on a Toyota Truck with no rear bumper, a body lift and 33" tires. The fit to the frame was perfect with no modifications, but hardware diagram could gave been a little better, I ended up putting 2 of the bolts in the wrong place and had to go back and switch them. Seems to be a good product,just wish it had mounted closer to the bottom of the truck.

Click to Enlarge

by: Mike 05/01/2022

Hitch shipped fast! Was fairly easy to install overall it fit our 1987 4x4 Toyota pickup perfect!

Click to Enlarge

Mike One Year Later

5/2/2023

This hitches worked out wonderful super solid strong get all sorts of complement and looks great on the truck would not hesitate to buy another one again at all. we towed are boat all summer long to, all the lakes, bays, rivers, and that hitch is held up really well.

by: RodDawg 09/27/2019

I put it together with hand tools and I’m not the quickest at doing stuff so it took me and hour because the instructions were right but I didn’t see the long screws in the bag that go through the frame and I was confused, but once I figured it out it was a breeze. This bumper also fits the Toyota Hilux trucks, this was my main concern seeing as I bought this to go on my Hilux. Nobody i could find knew if it would fit so I took a chance and bought it and it fit like a glove.

Click to Enlarge

by: John 04/27/2022 One Year Later

Even after a year, the tow package I purchased is still holding strong.

Click to Enlarge

by: Richard 08/31/2025

Bolts and carriage bolts are too long. It is almost impossible to get a torque wrench with a standard socket on the nuts. You need a deep well socket set to torque these.

by: Arik 03/30/2026

1993 Toyota Pickup

Awesome product! Mounted right up on my 93' Toyota 4x4!!!! I'm stoked!!!

by: Scott 09/14/2020 One Year Later

Mounted this hitch on my 1994 Toyota pickup. Fit perfectly. Towed a teardrop trailer from Idaho to the border of Mexico and back. Worked great.

Scott One Year Later

9/16/2021

Still works great.

by: Nick 09/03/2024 One Year Later

The folks at etrailer sent me a quality hitch/receiver, and I am really happy about it. The shipping was fast, the packing was quality, and the fitment is excellent and can be installed with simple hand tools. The kit did miss one bolt, which is okay because etrailer drop shipped me one immediately after I contacted them about it. I would purchase again if I ever needed to. Thanks again!

by: Peter 05/28/2023 One Year Later

Bolt-on, no-fabrication installation as advertised. Fits perfectly with factory bumper, even with factory ball left in place. All necessary hardware was included and of good quality. Tested to 2T several times over the past year and have had no issues. Surface coating is impressively durable also. Has appropriate tolerance on receiver and convenient sizing/location for safety chain holes. Only downside I can think of is that the info tag is a sticker rather than a stamped plate. Other than that, this is a perfect product.

by: Luke 08/21/2022

1989 Toyota Pickup

First off - etrailer; I can't believe how quickly everything came. Very impressed with the operation.

As for the hitch itself, it is "pretty good" and for the price it really is worth it. Overall the quality is very reasonable, it's heavy (62 lbs. with hardware) but I expected that, and I had no major hiccups installing it. You could do worse. I will list some of its shortcomings though, in case you wanted to shell out more and wondered what problems that might solve:
- the hitch bar itself arrived with some scratches and one of the end plates that connects it to the hitch side brackets was slightly bent on one corner. I saw no indication of anything in the etrailer box that could have done this so have to assume it happened beforehand. The bend resolved itself during torquing but the scratches are still present... I don't care, but you might.
- as many other reviews here noted, there is not enough clearance for the exhaust hanger, at least not on my vehicle (1989 Toyota Pickup DLX Extended Cab 2wd 22RE model). I actually thought there was during test fitting, but upon torquing fasteners, the spot-welded plate on the hitch side bracket that was meant to cover over the exhaust hanger cutout notch was ripped off. No big deal for me, the plate came off cleanly, no damage to anything. The notch *is* large enough, without that cover plate, to accommodate the hanger.
- The bolt kit for the hitch came with a giant pile of carriage bolts which mostly worked very well (the square notches under the head fit into either square notches on the hitch side brackets or into provided spacers) *except* when I was remounting the bumper. When you remount the bumper with this hitch, in most cases you end up moving your original Toyota bumper brackets outside the frame by 1/4". The kit comes with 1/4" spacers to make up for that relocation, and also longer bolts (your Toyota stock ones will not be happy with this relocation) to help you secure the bumper. These longer bolts are aforementioned carriage bolts, and unfortunately Toyota didn't make square holes in the bumper for them... they are round holes. Curt really has no excuse here, since they *do* provide hex head bolts that are used elsewhere in the install, and had they done so for the bumper, everything would be hunky dory. As it is, it was impossible to torque with the carriage bolts in the bumper and I didn't want to cut out the openings in the bumper to accommodate the square neck of the carriage bolts. Mercifully my local Ace Hardware had 1.5" grade 8 hex head 1/2" 13 tpi stainless bolts in stock for $[XX] so four of those got me going. But it caused the install to run longer than an hour, which was bearable but annoying.

Overall, I'm happy with the hitch. If you take note of my few complaints above, you will be too.

by: Donald W. 01/20/2013

1996 Honda Accord

Impressive! Received the two hitches I ordered (Class 3 for 1989 Toyota Pickup and Class 1 for 1996 Honda Accord), plus wiring, very fast and in great condition. Vendor was wonderful and would do business with him again, no hesitation! Honda hitch was a breeze. easy to follow directions. Wiring connection could not have been simpler - just plug it in. Toyota hitch was a bit more involved as had to remove the back bumper first (per the instructions) and a heavier hitch. Only snag was I had to notch a bit deeper for the muffler hanger. Wiring was easy as well. Great installation. Professional and prompt vendor. Good product. Good price. No shipping charge and no sales tax. What more could one possibly hope for??!

by: VanF 11/06/2014

I received the hitch. The box had a small tear in it but in general it arrive just fine. My mechanic installed it. The old bolts on my pickup was badly rusted and cause difficulties. The mechanic said everything else went just fine.
Previously I ordered a hitch from Amazon. I registered my vehicle and then followed links to find a hitch to buy along with a wiring harness. Both the hitch and the wiring harness did not fit my 1994 Toyota 4x4 pickup even though I followed the correct procedures. The return procedures from Amazon went quite well. The very big problem was when I returned the hitch I had to pay the return postage of $58. The hitch cost $150. I was extremely unhappy about this but I only had a few days to get it back or they would deny my refund.
My mechanic suggested I try this site (etrailer) so I did.
Etrailer's products fit just fine and Amazon's did not.
The wiring harness installed just fine only there was a problem with a distribution box on my pickup. The mechanic is working on it right now.
I am happy with my purchase of the hitch and wiring harness with etrailer.
Thank You

by: Tim 06/29/2021

1989 Toyota Pickup

I'm doing some upgrades on my 89 Toyota pickup.. Winch bumper and winch, body work, etc.. My pickup came stock with a 1 1/4" receiver hitch, I wanted a 2: receiver and after a bit of searching found the Curt, class 3, 2" receiver hitch, made to fit, with no drilling.. It took less than a week to receive the hitch.. In comparison, the Warn winch bumper and winch took over 2 weeks.. The receiver hitch fit as advertised, no drilling.. It bolted on just like the original.. The instructions that came with the hitch were a bit vague but sufficient.. E-trailer did a great job and I would not hesitate to order from them again..

by: Chuck Y 07/30/2014

1993 Toyota Pickup

Hitch assembly received super quick. Not installed yet, but will be in next few days. All parts needed to install were in box and instructions seem clear and concise. Appears to be a high quality hitch receiver. Another painless deal from etrailer.com. Thanks so much.

by: Daniel 04/23/2020

1990 Toyota Pickup

I had previously bought a hitch for my truck from a different brand that was an absolute disaster. Following the directions step by step and the thing just wouldn’t work. I returned that hitch and found this Curt hitch from etrailer.com that was advertised as an exact fit. I was skeptical but ordered it. My hitch came in the mail faster than expected, simple directions, and the hitch mounted to the truck and fits like a glove. Even came with bolts to reattach the bumper to its bracket rather than having to use the almost 30 year old bolts again. I would suggest this brand and etrailer.com to anyone!

by: Gene 05/14/2020

Really good quality product. Clear instructions. All parts were included. No problems with installation.

Nancy Q. One Year Later

5/15/2021

Working perfectly. Exactly the fit and performance I had hoped for. Highly recommend.

by: Gary H. 04/17/2016

1989 Toyota Pickup

I had purchased a trailer hitch from a company using Amazon. They listed my vehicle as a vehicle the hitch would work on. Did not fit. Not even close. I ordered this Curt Trailer hitch from e-trailer. Delivered quickly easy, understandable instructions. It was the perfect fit. Had it on in no time. Installed easy and exactly as show on the instructions. I had earlier ordered a wiring kit from etrailer. It also was easy to install. Most of the time when I undertake a project like this I have all kind of issues and problems. This was a pleasure. Great company.

by: Bob L. 03/12/2022

1994 Toyota Pickup

Just installed my hitch. Had to cut out bigger notch for exhaust hanger. Other than that great fit and great quality. Highly recommend! My only complaint is shipping box was torn open at both ends and bag of nuts and bolts was also open. When I picked up the box, numerous nuts and bolts fell out. Needless to say I was short some mounting hardware. Easily solved. WAY BETTER than anything from china.

by: Mark 04/24/2015

Fast shipping with all parts, including extra bumper bolts. I did remove the square tab on the driver's side bracket in order for the muffler hanger to fit. Easy to follow instructions, taking a couple hours for total install. Very satisfied with my receiver hitch and ball mount.

Thanks etrailer

by: Ryan 01/30/2025 One Year Later

Pulled some heavy things with this hitch and my 86' Toyota pickup. No problems. It's been a year. It's been great to have this hitch.

by: Rose 06/12/2025

Fit great! Thanks to natalie for the help getting me the right one

Brooke M.

6/16/2025

Happy to hear that. :) Natalie is awesome! I'll make sure she sees your review- she's going to appreciate you so much for it :)

true

Show More Reviews

See what our Experts say about this CURT Trailer Hitch

Do you have a question about this Trailer Hitch?

What Hitch do You Recommend for My Japanese 1992 Toyota Hilux?
For your 1992 Toyota Hilux, we did have a neighbor that installed the Curt Trailer Hitch Receiver # 13086 on his Toyota Hilux model. I went ahead and attached a picture of the fitment of the hitch on his truck. However, I called Curt and my contact confirmed that there is no way of telling if that hitch will fit for sure on your 1992 Toyota Hilux. Also, as you can see in the attached picture, the hitch does not have the cleanest installation. With that being said, I recommend a universal...
view full answer...
Trailer Hitch Hardware for Class III Hitch Receiver on 1989 Toyota Pickup
To get your replacement hardware for your trailer hitch receiver, I recommend the Replacement Hardware Kit for Trailer Hitches # RHK. The size of bolts and hardware needed varies depending on the hitch, so this will ensure you have the correct fit for your 1989 Toyota Pickup. Most hitches that are Class III use grade 5 hardware. If you don't have the hitch yet, I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # 13086 which is a fairly easy to install option for...
view full answer...
Trailer Hitch Options for 1990 Toyota Winnebago Warrior RV
The two hitches we offer for the 1990 Toyota pickup are shown on the linked page. These are intended for the standard pickup, not for the versions produced by RV makers, which naturally have additional structures and equipment. You can get a reasonable idea about compatibility by finding the hitch mounting points on the truck's frame. Both the Draw-Tite # 75031 and the Curt # 13086 share a similar design based on the frame mounting points where they will attach. Both bolt to the outsides...
view full answer...
Hitch Recommendation for a 1994 Toyota Pickup Truck
Yes, the Curt Hitch part # 13086 that you referenced has been confirmed to fit your 1994 Toyota Pickup. It will fit your truck that doesn't have a bumper, and as long as the bumper you plan to install is an OEM bumper there wouldn't be any interference. This hitch won't interfere with your spare tire either. If you plan on doing some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4...
view full answer...
Will the Curt Class III Trailer Hitch # 13086 Fit a 1988 Base Model Toyota Pickup with Short Bed
According to Curt, their Class III Trailer Hitch, # 13086, will fit all models of the 1988 Toyota Pickup, so it will fit your base model short bed. I have attached the installation instructions for you to check out. If you will be doing the installation yourself, you may need to fabricate a 1/4 inch thick spacer block if your bumper brackets are on the inside of the truck frame. I have included the diagram from the installation instructions for the dimensions of the spacer. If you need...
view full answer...
Can my 1991 Toyota Pickup Tow my 7000 LB Rated Trailer with a 5000 LB Rated Hitch
It is typically not a concern to tow a 7000 pound GVWR trailer as long as you never exceed the hitch's maximum rating of 5000 pounds or the maximum tow rating of the truck. At your specified weight of approximately 4800 pounds fully loaded, you would still be within the weight capacity for your trailer hitch. I have never heard of any laws that go by different specifications but I still recommend contacting the California State Highway Patrol. This would ensure that they don't have any...
view full answer...
Height from Top of Brackets to Top of Receiver Tube on Curt Trailer Hitch 13086
I spoke with my contact at Curt and found that the distance from the top of the side brackets to the top of the hitch receiver tube is 9.8 inches. I made a picture showing this for you.
view full answer...
Will Curt Trailer Hitch 13086 Fit a 1981 Toyota Pickup Truck
Curt trailer hitch # 13086 only goes back to 1984 Toyota pickups so it is not a confirmed fit for your 1981 model. I spoke with Curt at the width between the mounting side plates is 41-1/4 inches. From the center of the rear most hole (on the vehicle) to the middle hole is a little over 3-3/16 inches. And from the center hole to the furthest hole is 8 inches on center. Since Curt doesn't have the rail measurements of the truck I can only get the bolt hole spacing and width of the hitch.
view full answer...
Can I Tow a 2100 Pound Boat on My 1985 Toyota Pickup?
If you are going to purchase the Curt Hitch # 13086 for your 1985 Toyota Pickup, the hitch will be able to withstand the 2,100 pounds of your boat (along with the trailer as long the combined weight does not exceed 5,000 pounds or whatever the max tow weight capacity rating is for your 1985 Toyota Pickup). From my research, it looks like the weight rating of your vehicle is 3,500 pounds. However, in order to know for sure, I recommend consulting your owner's manual for that capacity. As...
view full answer...
Replacement Hitch for 1991 Toyota Pickup Truck
We would not have a part such as this. All the brands we sell are welded together and then the large side plates are bolted to the frame of the truck. If the metal on that part has cracked then I suspect the remainder of the hitch is of a concern for weaken structure. I recommend replacing the entire hitch with the Curt # 13086 Class-3 hitch with 2" receiver that is a confirmed fit for your truck, and includes all hardware needed for installation.
view full answer...
RV Trailer Hitch For a Class-C 21 Foot Winnebago
RV style hitches can be bolted or welded on your Winnebago frame whereas most vehicles will have mounting holes preset for trailer hitches. I wouldn't recommend using a vehicle trailer hitch. The Curt hitch # 13086 you referenced is a confirmed fit for your 1992 Toyota pickup. For your motor home, the most likely hitch to fit is the Curt adjustable width trailer hitch receiver # 13703. It's a Class-III hitch and can be adjusted from 22-72 inches in width. It will have a gross trailer weight...
view full answer...
Fit of Curt C13900 Universal Fit Trailer Hitch on 1989 Toyota Pickup
According to Curt, their Universal Fit # C13900 trailer hitch is a fit for a 1989 Toyota pickup, but you'll likely need to drill into the frame to mount the hitch. If you'd prefer a no-drill option, use the Curt # 13086.
view full answer...
Curt Hitch that Fits 1992 Toyota Pickup Deluxe
We have custom fit trailer hitches for your 1992 Toyota truck like the Curt Class III part # 13086 which will fit and work well, but the Curt # E-3S is a universal style hitch that doesn't have vehicle fit info so we can't promise it could fit.
view full answer...
Parts Needed To Tow a Trailer With Brakes Using a 1994 Toyota Pickup
I have attached for you below a list of the part you will need to tow a trailer with brakes using your 1994 Toyota Pickup. Curt Trailer Hitch Receiver part # 13086 Hopkins Plug-In Simple Vehicle Wiring Harness part # HM43315 Universal Installation Kit for Trailer Brake Controller part # ETBC7 Tekonsha PowerTrac Electronic Brake Controller part # 39523 Replacement Brake Control Plug-In Harness for Tekonsha part # 20127 The Hopkins Plug-In Simple Vehicle Wiring Harness plugs in behind the...
view full answer...
Does the Bumper of a 1988 Toyota Pickup Get Modified When Installing a Curt Hitch # 13086
You would not need to modify your bumper in any way to install the Curt Hitch part # 13086 on your 1988 Toyota Pickup. This hitch will install below the bumper. I attached installation instructions for you to check out. You will see that the bumper gets removed during installation, but it gets put back on once the install is complete. For trailer wiring you would want the wiring harness part # C59496. Install video attached. For a ball mount, hitch ball, and pin and clip, I would recommend...
view full answer...
Will Westin 61000-94400 Bumper Interfere With Curt 13086 Hitch Receiver On 1988 Toyota Pickup?
The Westin Fey Diamondstep Rear Bumper with Custom Installation Kit - Black Powder Coated Steel # 61000-94400 is made to be a factory-style OEM fit and will not cause any issues with the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # 13086 being installed on your 1988 Toyota Pickup. Everything necessary for installation is included, including license plate lights and wiring.
view full answer...
Are Bumper Brackets Needed for Support when Installing the CURT Hitch #13086 on a 1986 Toyota Pickup
You can install the Curt Class III Receiver Hitch, # 13086, on your 1986 Toyota pickup. The installation instructions, see link, detail installation on vehicles without a rear bumper. The bumper brackets are not needed for installation or support. Some items you may want to consider to complete your towing setup are the etrailer.com Ball Mount Kit, # 989900, and the Trailer Wiring Harness Kit, # C59496.
view full answer...
Curt Hitch Recommendation for a 1991 Toyota Pickup
As long as your 1991 Toyota Truck is not a T-100 or a Tacoma the Curt Trailer Hitch # 13086 would work well for you. I attached installation instructions for this product for you to check out also. To complete your towing setup you may be interested in the following products: etrailer Ball Mounts # 989900 Draw-Tite Wiring Harness # 118379
view full answer...

Do you have a question about this Trailer Hitch?

Info for this part was:

Expert Research:

Mike L

Expert Research:

Robert G

Expert Research:

Michael H

Expert Research:

Jameson C

Expert Research:

John H

Video Edited:

Chris R

Updated by:

Wilson B

Updated by:

Kristina F

Updated by:

Michael B

Updated by:

Isabelle B

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.