Replacement Wiring Harness For a Adams Drift Boat Trailer
Updated 07/06/2022 | Published 07/04/2022 >
Products Featured in This Question
Question:
I have an adams drift boat trailer and I want to replace the entire wiring harness without doing any splices. The harness itself is a four prong flat type in the front and ends in a standard three prong plug for the 6.5x2 oval recessed submersible tail light. Drift boat trailers have short frames. Can you help me?
asked by: Verlon H
Expert Reply:
The 25 Ft 4-Way Trailer Wiring Harness # A25W2GWB would be the closest harness we carry for your Adams drift boat trailer. This will require you to splice the 3-Wire Pigtail # A45PB for your Optronics Fleet LED Trailer Tail Lights # TLL12RK as we do not carry a harness that has the connectors you need already spliced into the harness. I recommend using the Deka Heat Shrink Butt Connector # DW05744-5 to make the connections. You will need 2 of these 5 packs to get the 6 connectors you need.
If you do not feel capable of making the splices you can have it done at your nearest service center. You also may need to have the harness ran as the connectors may not fit through the frame when connected.
Product Page this Question was Asked From
Optronics Fleet LED Trailer Tail Lights w/ Grommets - Stop,Turn,Tail - Submersible - Oval - Qty 2
- Trailer Lights
- Tail Lights
- Brake/Tail/Turn
- Oval
- Recessed Mount
- Submersible Lights
- LED Light
- 6-1/2L x 2W Inch
- Red
- Optronics
more information >
Continue Researching
- Article: Trailer Wiring Diagrams
- Article: Trailer Lighting Requirements
- Q&A: Hole Size Dimension for Optronics LED Tail Light with Grommet
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Q&A: Will Adarac Pro Series Ladder Rack Work With TruXedo Hard Roll Up Tonneau Cover?
- Q&A: How Far Apart Are The Bolt Holes On etrailer Scissor Jacks e56VV ?
- Q&A: Can I Plug the etrailer Electric Trailer to the OEM 7-Way On a 2016 GMC Sierra 2500
- Q&A: Instructions to Wire a Trailer for Electric Brakes
- Q&A: Recommended Trailer Tail Lights To Replace Older Glo-Brite 9553
- Q&A: Replacement For Kwikee Control Module 1510000140
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Wiring Trailer Lights with a 5-Way Plug (It's Easier Than You Think)
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)

