Can I Use A Hollywood Racks Destination Bike Rack On A Class C Motorhome

Question

Question:

Is this bike rack rated to be used on a receiver hitch of a class C motorhome?

asked by: Stephen E

1

Helpful Expert Reply:

Yes, the Hollywood Racks Destination Bike Rack for 4 Bikes - 2" Hitches - Frame Mount, part # HR4000, is rated for use on the rear of a class C motorhome. I have included a video review link below.

expert reply by: Mark Smith

1

Answer 1

Hello Stu, thanks for getting in touch. For a travel trailer approved e-bike rack, what I recommend is the Swagman E-Spec Bike Rack #S94FR. This rack has a reenforced shank, making it suitable for RVs and travel trailers. It has a 70 lb per bike…

view full answer...

Answer 2

There are few items you are going to need to flat tow your 2019 Mini Cooper behind your 2020 Tiffin Wayfarer. The following is what you will need to set the vehicle up: Blue Ox Base Plate Kit Item #BX1312. This base plate is a custom fit base plate.…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 11

Hey Josh! Yes, the Pacbrake Alpha XD Pro Air Bag Suspension Kit w/ Internal Jounce Bumpers #PB89RV will fit your Sprinter. This is specifically designed for models with dual rear wheels. The only reason these wouldn't work is if you have the ride…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...