Is There A Way To Daisy Chain Two Mighty Cord RV Power Cord Adapters?

Question

Question:

Mighty Cord RV Power Cord Adapter - 50 Amp Twist Lock Female to 30 Amp Male - 25 Item # A10-3050EHD I ordered two of these by mistake. Rather than returning is there a connector to allow me to connect them to make a 50 ft cord in the event I need that length? If not, is there an 30 amp extension cord/s that work with the Mighty Cord are available that I can purchase and return the other Mighty cord. Thank you.

asked by: Scott T

0

Expert Reply:

I do have a solution for you, however since your Mighty Cord RV Power Cord Adapter # A10-3050EHD has a twist lock on one end, there is not going to be an adapter.

Instead, the best solution I can offer is to cut off the twist lock connector on one cord, and re-wire the one end with the:

-Power Grip Replacement RV Power Cord Adapter Receptacle w/ Handle # CAM55343.

From here, you would plug the one twist lock connector into your trailer, plug the male 30amp to the newly rewired 30amp female connector, and then plug the final 30 amp male connector into the power pedestal.

expert reply by: Bryce D

0

Answer 1

The B&W Companion Gooseneck-to-5th-Wheel Trailer Hitch Adapter - Dual Jaw - 20,000 lbs #BWRVK3500 has the polyurethane molded bushings on the pivot arms. This is where noise and squeaking could come into play, so the manufacturer recommends using…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

The differences between the Firestone Ride Rite #F2613 and the Red Label #F2709 for your 2023 GMC Sierra 3500 Crew Cab Long Bed is the air pressure and max weight capacity. The Ride-Rite #F2613 are rated for 5,000lbs and 100 PSI, where the Red Label…

view full answer...

Answer 11

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 12

Hey Brad, thanks for reaching out. The factory brake controllers they put in the 2015 GMC trucks are largely incompatible with EOH brakes. That is one of the specific model years we see a lot of issues with since they don't have an EOH mode.…

view full answer...

Is There A Way To Daisy Chain Two Mighty Cord RV Power Cord Adapters?

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching