What Size Bolts Are Used With The First Generation 4-Step MORryde Steps?

Question

Question:

What size bolts to mount hand rail 1st gen 3steps

asked by: Everett R

0

Expert Reply:

The bolts for the Handrail for First Generation 4-Step MORryde Steps # MR33RR will use (4) 1/4" - 20 x 1 1/2” long, grade 5 steel, zinc coated bolts.

Additionally, the corresponding washers are also 1/4", and is made of grade 2 steel with a zinc coating.

expert reply by: Bryce D

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 4

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 5

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 6

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 7

Hey Robert, thanks for all of the information. The MORryde Suspension Upgrade Kit item #MR98ZR is what you will need if you have Correct Track suspension. You would have adjustable axle hangers like the picture below. If you have standard hangers…

view full answer...

Answer 8

Hey Jeff! For a quiet fresh water pump I recommend the Seaflo Diaphragm Pump #SE57FR. The Seaflo uses variable-flow operation, so it does not hard cycle on and off like a standard demand pump. That gives you smoother water flow with less vibration…

view full answer...

Answer 9

Hello Mark, Thanks for the information off the pigtail, always most helpful. We do not carry the Fairview brand, but the Propane Hose with Back Check - Type 1 x 1/4" Male NPT - 20" #37207-30865 will work as a great replacement. The hose is…

view full answer...

Answer 10

Hey Melanie. The reason you can't find a replacement for your GE ARC15AACBL2 15,000 btu air conditioner is because they phased them out. In 2025 all RV AC systems had to change over to a new coolant called R32. This was a EPA mandated decision.…

view full answer...

Answer 11

Hey Zoniezz, thanks for reaching out! That flat pieces with the 3 holes from the MORryde X-Factor Crossmember Adapter Kit #MR93WR are spacers, and they can be placed between the mounting brackets and the crossmember (see blue highlight in linked…

view full answer...

Answer 12

Yes, there is Barb and thank you so much for the information! We do not carry the Fairview brand, but we do have the Propane Hose item #37207-30865, which is a direct replacement of your Fairview I4TC20MP4QC4. The Propane Hose item #37207-30865 is…

view full answer...

What Size Bolts Are Used With The First Generation 4-Step MORryde Steps?

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching