Length and Diameter of Replacement Hitch Pin Clips

Question

Question:

What are the measurements of the hitch pin clips Item # GY69FR? Im looking for hitch pin clips that have a measurement of 1/8inch diameter x 2inch long.

asked by: Daniel L

0

Expert Reply:

I checked with Gen Y and they told me that the length of the Replacement Hitch Pin Clips part # GY69FR is 2-3/4 inch and the diameter is 1/8 inch.

expert reply by: Jameson C

0

Answer 1

Actually it would be possible to use the GearSpace 34 Enclosed Cargo Carrier #HGK826 with a dual hitch adapter like the part #RM-077-4. The top opening can be used for the carrier and the bottom for flat towing a vehicle with a tow bar.

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 4

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 5

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 6

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Answer 7

Trailer wheel bearings are specific to the spindle that is installed on the axle that is on your trailer. You will need to safely support the trailer, remove the wheel and tire, remove the grease cap, remove the cotter pin and washer that secures the…

view full answer...

Answer 8

Hey Greg! The etrailer Anti-Rattle Hitch Collar for 2.5" Hitch Receivers #e55YV is not compatible with a weight distribution hitch. This is really the only restriction for our anti-rattle. If you need an anti-rattle for a weight distribution…

view full answer...

Answer 9

Hi Kristian, great question! The etrailer Anti-Rattle Hitch Collar, part #e55YV, works by taking the slack out between your hitch receiver and the shank of your ball mount or hitch-mounted accessory. It clamps around the outside lip of your 2-1/2…

view full answer...

Length and Diameter of Replacement Hitch Pin Clips

Product Page this Question was Asked From

Continue Researching