Replacement Hub for 2002 Coleman Niagara Pop Up Camper
Updated 06/16/2022 | Published 06/15/2022
Products Featured in This Question
Question:
Good morning. I am trying to find the hub or hub kit replacement for my 2002 Coleman Niagara. I saw the BK2-100 is the bearing replacement kit but i am also looking for the correct hub.
asked by: Anthony J
Expert Reply:
It does look like the 2002 Coleman Niagara uses the standard 3,500 lb axle bearings like the ones in the # BK2-100. I recommend verifying this information first by either identifying the axle and the parts it uses using the axle tags or finding the part numbers on/measuring your existing bearings.
If that is correct, you need a 3,500 lb hub which uses these bearings and matches your current bolt pattern. More than likely you have a 5 on 4-1/2 bolt pattern right now. Assuming that is the case, you could use the Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased # AKIHUB-545-35-K. If you have an E-Z lube axle then you would need the # AKIHUB-545-35-EZ-K instead.
I have attached a link to all of our hub assemblies that match these bearings, along with a helpful article on how to measure bolt patterns for your reference.
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Timken Bearing Kit, L44643 Inner/Outer Bearings, L44610 Inner/Outer Races, 204507 Seal
- Search Results: axle dust caps
- Shop: Timken Replacement Trailer Wheel Bearing - HM212049
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Bearing Kit with Grease Cap for 1" BT8 Spindle, L44643 Inner/Outer Bearings, 34823 Seal
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Grease Cap, 1.988" OD Drive In - Qty 2
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Video: Timken Bearing Kit Installation - Enclosed Trailer
- Q&A: Replacement Brake Assemblies, Bearings, Seal and Hub for 2002 Coleman Fleetwood Pop Up
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Wiring Diagrams
- Q&A: Bearing Kit for 2017 Jayco Jay Flight 17BH
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Bearing Kit for Lippert 4,400 lb Trailer Axle
- Q&A: Replacement Bearing And Seals For UFP Hub H-1062-2
- Q&A: Replacement Hub/Rotor and Bearings for Tie Down Engineering TDE46245
- Q&A: What is the Best Grease for Trailer Bearings
- Article: How to Bleed Your Trailer Surge Brakes