Best Gooseneck Coupler for a Bulldog Gooseneck PJ Trailer

Question

Question:

have a PJ gooseneck trailer and has a bulldog name on the neck. will this BLTL 55-40D work? cant find the bulldog name under this lock but its listed on some of the other style. nothing about if its for a 2 5/16

asked by: Carl W

0

Expert Reply:

Since you have a Bulldog gooseneck coupler the correct lock for you is Blaylock EZ Lock Gooseneck Coupler Lock item # BLTL-50-40D. This lock has a narrower bracket feature than the Blaylock EZ Lock Gooseneck Coupler Lock item # BLTL-55-40D which is exclusively for Ram goosenecks.

expert reply by: Jerred H

0

Answer 1

Hey Bob, Yes, for a Demco EZ-Latch gooseneck coupler you would want the Demco Gooseneck Coupler Lock #DM88KV. This lock will cover not only the hole for the gooseneck ball but the EZ-Latch as well so that no one can pop open the coupler and take off…

view full answer...

Answer 2

Hey, Johnny! The Demco gooseneck coupler lock part #DM88KV will definitely work for your PJ gooseneck trailer. As long as it has the Demco EZ latch. The lock specifically designed for their EZ Latch gooseneck couplers that are rated for 30k. I…

view full answer...

Answer 3

Based on my research, PJ trailers outfit their trailer with a Bulldog gooseneck coupler. As long as your trailer still has a Bulldog coupler, you will want to use Baylock EZ Lock Gooseneck Coupler Lock - Bulldog/Stallion/Superior/T.E.M. Gooseneck…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 8

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Best Gooseneck Coupler for a Bulldog Gooseneck PJ Trailer

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching