Does the Curt Hitch Adapter # C45785 Come with a Hitch Pin?

Question

Question:

Today I ordered Curt 1.25 to 2” hitch adapter. Does it come with a pin?

asked by: Matthew B

0

Expert Reply:

The Curt Trailer Hitch Receiver Adapter - 1-1/4" (Class II) to 2" # C45785 does not come with a hitch pin. If you are in need of a hitch pin for the 1-1/4" end of the receiver, that is the # 5200. For the 2" receiver end, that is the # e98880. Both of these are locking pins in order to protect your adapter as well as your hitch-mounted accessories.

expert reply by: Bob C

0

Answer 1

If you are wanting to use your 2" bike rack you will want to install the EcoHitch Hidden Trailer Hitch Receiver #306-X7301 on your 2016 Mazda 6. Both the Trailer Hitch Receiver Adapter #e43YR which will fit the Curt Trailer Hitch Receiver…

view full answer...

Answer 2

Hey Pam, so the highest rated 1-1/4 inch to 2 inch hitch adapters we offer have a 350 lb tongue weight capacity like with the part #e43YR for a straight adapter or the part #e93YR for one with a rise built into the shank. You have to keep in mind…

view full answer...

Answer 3

I do have an option for you but there are unfortunately only class I, 1-1/4" trailer hitch options for a 2019 Volkswagen Jetta which is the case for a lot of these smaller sedans since they are not designed for heavy duty pulling or hauling. I…

view full answer...

Answer 4

I do see your Aventon Level 2 bike has a weight of 54lbs. Since you are using the Curt Receiver #C12490 on your 2013 Scion xB and being a 1-1/4" receiver I recommend the Yakima OnRamp #Y28DJ as it can support bikes up to 66lbs each and has a…

view full answer...

Answer 5

Hey Bob, the etrailer 1-1/4 inch to 2 inch hitch adapter part #e93YR that you referenced would work for you. This does cut the capacity of the hitch it is used with by 50 percent so you'd need to make sure that the OEM hitch of your RAV4 has…

view full answer...

Answer 6

Hey Doug! The closest thing we have to what you're asking for is the 1-1/4" to 2" Trailer Hitch Adapter item #e93YR. This has a 5" rise and most likely won't work for your Camry for the same reason what you're asking for…

view full answer...

Answer 7

Hey Walt. The EcoHitch Hidden Trailer Hitch item #306-X7359 is preferred because it has a 2" receiver over the Draw-Tite item #24956 1-1/4" receiver. There's way more bike racks and cargo carriers that fit 2" hitches than there are…

view full answer...

Answer 8

Hi Richard, Using a hitch adapter will reduce your trailer hitch's capacity by 50% and the use of an adapter isn't always allowed depending on the bike rack. You'll want to first check with the bike rack manufacturer if they allow for an…

view full answer...

Answer 9

Hey Rachel, few things here. First off, the Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" #C12184 does indeed need the stabilizing strap #18050 on non-trailered loads like a bike rack to add in support. And to answer your other…

view full answer...

Answer 10

I would discourage the use of an adapter for use of 2 inch accessories in 1-1/4 inch trailer hitch receivers. The reason is that the adapter places the carrier farther away from the rear of the vehicle and hitch, creating additional torque that 1-1/4…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Does the Curt Hitch Adapter # C45785 Come with a Hitch Pin?

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching