Replacement Mounting Hardware Kit for BAKFlip G2 & MX4 Hard Tonneau Covers

Question

Question:

Backflip 226102 I need the hardware kit number for the above listed part

asked by: Clayton

0

Expert Reply:

I think what you are looking for is the Replacement Mounting Hardware Kit for BAKFlip G2 Hard Tonneau Cover, # BAKBK-200KIT. This is for the BakFlip G2 model tonneau cover, # BAK26120 and the BAKFlip MX4, # BAK48329. If your cover is not a G2 model, please let me know.

expert reply by: Michael R

0

Henry K.

1/16/2025

Do you have an image of the MX4 mounting hardware? I would need this before purchasing

Jon G.

1/16/2025

@HenryK That kit was discontinued a bit ago so we don't have it, but you might be able to find it as "BK-200KIT" elsewhere. If you're struggling to find it, we might need to get you set up with a different cover that has replacement parts available. Let me know if you can't find it and I'll be happy to make a replacement cover recommendation for you!

Answer 1

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 2

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 3

Hey Kelvin, welcome back. To flat tow a 2026 Ford Maverick with your Demco Commander II Tow Bar item #DM9511012, I recommend the following parts: Baseplate Kit - Demco Tabless Base Plate Kit item #DM38CV Wiring Harness - Roadmaster Diode 7-Wire to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Hi Gary, Yes, the Timbren Suspension Enhancement System, part #T28MR, for your 2019 Chevy Silverado 1500 is backed by Timbren’s 100 day money back guarantee as well as their limited lifetime warranty. That gives you a nice opportunity to actually put…

view full answer...

Answer 6

Hey Allen, thanks for the information. The best SumoSprings for your 2019 Chevy Silverado 1500 are going to be the 1,500 lbs capacity item #SS45FR. These fit both the 2WD and 4WD models and replace your factory bump stop. The SumoSprings item #SS45FR…

view full answer...

Answer 7

Hello Steve, Welcome to etrailer, I'm glad you found us! You will need to add the Pollak Mounting Bracket #PK12711U separately. The etrailer Trailer Hitch Receiver #e98850 does not include the electrical connector or a mounting bracket for it. It…

view full answer...

Answer 8

Hey Sean, yes you can use the TowSmart Adjustable Ball Mount #TS89VR in the Gen-Y Voyager Ball Mount #GY52JJ. This will provide cushioning to the adjustable ball mount plus some additional drop. What are you planning on towing with this setup?

view full answer...

Answer 9

Yes, Jeff, your 2024 Tacoma TRD is a great match, as is any vehicle with a 7 way connector on the back. You’ll just want to use the Redarc #RED57AR and you won't need anything else. It connects in front of the 7 way outlet on your vehicle, then…

view full answer...

Replacement Mounting Hardware Kit for BAKFlip G2 & MX4 Hard Tonneau Covers

Products Featured in This Question

Continue Researching